| Yazarlar |
Emrehan Gürsoy
|
|
Hayati Kadir Pazarlıoğlu
|
Doç. Dr. Mehmet GÜRDAL
Kastamonu Üniversitesi, Türkiye |
|
Kamil Arslan
Karabük Üniversitesi, Türkiye |
|
Engin Gedik
Karabük Üniversitesi, Türkiye |
| Özet |
| In this study, numerical analyses were conducted on bended tube with different bending radius and pitch ratios of dimpled fin under different Dean numbers from 9.1 to 301.2. The study examined in bended tube containing three dimple pitch ratios (P/d = 6.0–7.5–9.0) carried out under uniform heat flux of 600 W/m2 and different nanofluid volume fractions of Fe3O4/H2O (0.0 ≤ φ ≤ 2.0 %). The thermo-hydraulic performance and entropy generation of bended tubes were investigated. The results showed that Case 10 provided the highest Nu using H2O compared to Case 16, this enhancement was realized as 17.56 %. When nanofluid was used, the highest Nu was obtained at φ = 2.0 % volume fraction in Case 7 by 24.47 % in comparison with non-DT at Dn = 245.9. The highest PEC value of Case 7 using φ = 2.0 % was monitored as 1.11 at Dn = 245.9. Compared to the frictional and total EnGs of P/d = 6.0 and 9.0, the frictional and total EnGs of P/d = 6.0 show a decrease of 10.05 % and 9.60 %, respectively. |
| Anahtar Kelimeler |
| Bended tube,Dimpled fin,Entropy generation,Ferro-nanofluid,Dean number,Convective heat transfer rate |
| Makale Türü | Özgün Makale |
| Makale Alt Türü | SSCI, AHCI, SCI, SCI-Exp dergilerinde yayımlanan tam makale |
| Dergi Adı | Thermal Science and Engineering Progress |
| Dergi ISSN | 2451-9049 |
| Dergi Tarandığı Indeksler | SCI |
| Dergi Grubu | Q1 |
| Makale Dili | Türkçe |
| Basım Tarihi | 01-2023 |
| Cilt No | 37 |
| Sayı | 1 |
| Sayfalar | 101620 / |
| Doi Numarası | 10.1016/j.tsep.2022.101620 |
| Makale Linki | http://dx.doi.org/10.1016/j.tsep.2022.101620 |
| Atıf Sayıları | |
| WoS | 5 |
| SCOPUS | 8 |
