| Yazarlar |
Doç. Dr. Mehmet GÜRDAL
Kastamonu Üniversitesi, Türkiye |
Mutlu Tekir
Karabük Üniversitesi, Türkiye |
|
Noora Imad Algbourie
|
|
Hayati Kadir Pazarlıoğlu
|
|
Kamil Arslan
Karabük Üniversitesi, Türkiye |
| Özet |
| While the effect of the twisting ratio on a heat sink was investigated for the first part of the study, the diagonal length and pitch ratio were observed for following step. The parametric studies were applied under turbulent regime (2658≤ Re≤7138) to monitor thermo-hydraulic performance of novel proposed design. The edge length of the pin fins (Lef) was varied regarding their diagonal length (5≤ Lef ≤ 6) while the pitch ratio (P/e) and twisting ratio were varied in the range of 0.75≤ P/e≤1.0 and 50≤TR≤ 200 respectively. By using the turbulent model SST k-ω with low-Re correction model on ANSYS Fluent, the computational study has been carried out to discretize RANS equations. Average Nusselt number (Nu) and average Darcy friction factor (f) which define the thermo-hydraulic performance of system were elucidated in detail. As a result, the best thermo-hydraulic performance was achieved as 1.55 by using the lowest twisting ratio (TR=200), pitch ratio (p/e=0.75) and the highest diagonal length (Lef=6) and at Re=2658. |
| Anahtar Kelimeler |
| CFD | Convection heat transfer | Heat sink | Pin fin |
| Bildiri Türü | Tebliğ/Bildiri |
| Bildiri Alt Türü | Tam Metin Olarak Yayımlanan Tebliğ (Uluslararası Kongre/Sempozyum) |
| Bildiri Niteliği | Alanında Hakemli Uluslararası Kongre/Sempozyum |
| Bildiri Dili | İngilizce |
| Kongre Adı | 14th International Conference on Thermal Engineering: Theory and Applications |
| Kongre Tarihi | 25-05-2023 / 27-05-2023 |
| Basıldığı Ülke | Türkiye |
| Basıldığı Şehir | Yalova |
