Optimisation of wheat straw Triticum drum kraft pulping
Yazarlar (3)
Prof. Dr. İlhan Deniz Karadeniz Teknik Üniversitesi, Türkiye
Prof. Dr. Hüseyin Kırcı Karadeniz Teknik Üniversitesi, Türkiye
Prof. Dr. Saim ATEŞ Kastamonu Üniversitesi, Türkiye
| Makale Türü | Özgün Makale (SSCI, AHCI, SCI, SCI-Exp dergilerinde yayınlanan tam makale) | ||
| Dergi Adı | Industrial Crops and Products (Q4) | ||
| Dergi ISSN | 0926-6690 Wos Dergi Scopus Dergi | ||
| Dergi Tarandığı Indeksler | SCI-Expanded | ||
| Makale Dili | İngilizce | Basım Tarihi | 05-2004 |
| Kabul Tarihi | – | Yayınlanma Tarihi | 01-05-2004 |
| Cilt / Sayı / Sayfa | 19 / 3 / 237–243 | DOI | 10.1016/j.indcrop.2003.10.011 |
| Makale Linki | https://doi.org/10.1016/j.indcrop.2003.10.011 | ||
| UAK Araştırma Alanları |
Lif ve Kağıt Teknolojisi
|
||
| Özet |
| This paper explains the problems brought about by the raw material and pulping method used in the Afyon-SEKA Pulp Mill producing bleached pulp from mixed wheat straw (Triticum drum L.) (65%) and reed (Phragmites communis) (35%). The use of mixed raw material causes such problems, as heterogeneous pulping, low freeness level, drainage difficulties and wet sheet breaks during the papermaking operations. In addition, silica in raw material results in rather serious difficulties during recovery process. To overcome these problems, first of all, pulping of wheat straw and reed had to be carried out separately. In this case, sulphate pulping characteristics of wheat straw were investigated and optimum parameters were found to be: active alkali charge 14%, sulphidity 20%, maximum temperature 160°C, time to maximum temperature 55min, time at maximum temperature 40min and liquor to straw ratio 4:1. Some … |
| Anahtar Kelimeler |
| Chemical properties | Pulp properties | Pulping parameters | Silica | Wheat straw |
Science Direct
Optimisation of wheat straw Triticum drum kraft pulping
BM Sürdürülebilir Kalkınma Amaçları
| Atıf Sayıları | |
| Scopus | 94 |
| Google Scholar | 155 |