| Yazarlar |
Dr. Öğr. Üyesi Erman ZURNACI
Düzce Üniversitesi, Türkiye |
Hasan Gökkaya
Karabük Üniversitesi, Türkiye |
|
Muammer Nalbant
Gazi Üniversitesi, Türkiye |
|
Gökhan Sur
Karabük Üniversitesi, Türkiye |
| Özet |
| Bending response of corrugated core metallic sandwich panels was studied experimentally under three-point bending loading. Two different core configurations were used: the corrugated monolithic core and the corrugated sliced core. The trapezoidal corrugated cores were manufactured from aluminum sheets via a sheet metal bending mould. After the sandwich panel samples were prepared, they were subjected to three-point bending tests. The load and displacement responses of the sandwich panels having different core configurations were obtained from the experimental testing. The influence of the core configuration on the three-point bending response and failure modes was then investigated. The experimental results revealed that the corrugated sliced core configuration exhibited an improved bending performance compared to the corrugated monolithic core configuration. |
| Anahtar Kelimeler |
| bending response | corrugated core configurations | failure modes | metallic sandwich panel | three-point bending |
| Makale Türü | Özgün Makale |
| Makale Alt Türü | ESCI dergilerinde yayımlanan tam makale |
| Dergi Adı | ENGINEERING TECHNOLOGY & APPLIED SCIENCE RESEARCH |
| Dergi ISSN | 2241-4487 |
| Dergi Tarandığı Indeksler | Emerging Sources Citation Index (ESCI) |
| Makale Dili | İngilizce |
| Basım Tarihi | 04-2019 |
| Cilt No | 9 |
| Sayı | 2 |
| Sayfalar | 3981 / 3984 |
| Doi Numarası | 10.48084/etasr.2671 |
| Makale Linki | http://dx.doi.org/10.48084/etasr.2671 |
| Atıf Sayıları | |
| WoS | 1 |
| SCOPUS | 1 |
| Google Scholar | 2 |
