Effect of pressing conditions on some surface properties of HDF laminate parquets
Yazarlar (4)
Mehmet Erdal Kara
Sfc Integrated Forestry Products, Türkiye
Sfc Integrated Forestry Products, Türkiye
Prof. Dr. Zekeriya YERLİKAYA Kastamonu Üniversitesi, Türkiye
Prof. Dr. Saim ATEŞ Kastamonu Üniversitesi, Türkiye
Dr. Öğr. Üyesi Çağrı OLGUN Kastamonu Üniversitesi, Türkiye
| Makale Türü | Özgün Makale (SSCI, AHCI, SCI, SCI-Exp dergilerinde yayınlanan tam makale) | ||
| Dergi Adı | Indian Journal of Engineering and Materials Sciences | ||
| Dergi ISSN | 0971-4588 Wos Dergi Scopus Dergi | ||
| Dergi Tarandığı Indeksler | SCI-Expanded | ||
| Makale Dili | İngilizce | Basım Tarihi | 08-2016 |
| Cilt / Sayı / Sayfa | 23 / 4 / 274–278 | DOI | – |
| Makale Linki | http://www.niscair.res.in/sciencecommunication/researchjournals/rejour/ijems/ijems0.asp | ||
| UAK Araştırma Alanları |
Polimer Bilimi
|
||
| Özet |
| In this study, the effects of lamination conditions on some commercial high density fiberboard (HDF) panels surface quality characteristics, surface strength, impact resistance test (large diameter ball test), curing degree, scratch resistance, abrasion resistance are investigated. For this purpose, HDF panels are produced from mixture wood fibers (50% black pine and 50% beech wood) as 8.3 mm thickness. After panels sanded to 7.3 mm thickness, laminated at different pressures and times. It has been found that high pressure and short-term press time conditions have significant effect on surface strength, impact resistance, and abrasion resistance values. The best surface quality measurements are obtained from A1 group, pressure 340 kg/m² and 13 s pressing time (average of surface strength value of this group is 1.83 N/mm2, impact resistance value is 25.25 N and abrasion resistance value is 3650 revolution), but … |
| Anahtar Kelimeler |
| HDF laminate parquet | Laminating | Press conditions | Surface quality |