Optimization of Abrasive Water Jet Turning Parameters for Machining of Low Density Polyethylene Material Based on Experimental Design Method
Yazarlar (4)
Prof. Dr. Fuat KARTAL Kastamonu Üniversitesi, Türkiye
M. H. Çetin
Karabük Üniversitesi, Türkiye
Karabük Üniversitesi, Türkiye
H. Gökkaya
Karabük Üniversitesi, Türkiye
Karabük Üniversitesi, Türkiye
Prof. Dr. Zekeriya YERLİKAYA Kastamonu Üniversitesi, Türkiye
| Makale Türü | Özgün Makale (SSCI, AHCI, SCI, SCI-Exp dergilerinde yayınlanan tam makale) | ||
| Dergi Adı | International Polymer Processing | ||
| Dergi ISSN | 0930-777X Wos Dergi Scopus Dergi | ||
| Dergi Tarandığı Indeksler | SCI-Expanded | ||
| Makale Dili | İngilizce | Basım Tarihi | 08-2014 |
| Kabul Tarihi | – | Yayınlanma Tarihi | 12-08-2014 |
| Cilt / Sayı / Sayfa | 29 / 4 / 535–544 | DOI | 10.3139/217.2925 |
| Makale Linki | https://www.degruyterbrill.com/document/doi/10.3139/217.2925/html | ||
| UAK Araştırma Alanları |
Polimer Bilimi
|
||
| Özet |
| Studies to improve the machining of engineering materials have great importance for mechanical systems. Abrasive water-jet turning (AWJT) is a new and effective process for increasing machinability of engineering materials by providing temperature free cutting conditions, high surface quality and having no tool wear problem. In this study, AWJT of low density polyethylene (LDPE) material were investigated in terms of average surface roughness (ASR) and material removal rate (MRR) values and process parameters were optimized by experimental design method. The primary objectives of the study are to investigate AWJT process and system parameters to enhance machinability of LDPE material and to determine optimal processing parameters. Nozzle feed rate (5, 25 and 45mm/min), abrasive flow rate (50, 200 and 350 g/min) and spindle speed (1000, 1500 and 2500 min–1) were analyzed as process … |
| Anahtar Kelimeler |
BM Sürdürülebilir Kalkınma Amaçları
| Atıf Sayıları | |
| Web of Science | 16 |
| Scopus | 19 |
| Google Scholar | 25 |