| Yazarlar |
Doç. Dr. Alperen KAYMAKCI
Kastamonu Üniversitesi, Türkiye |
| Özet |
| The effects of TiO 2 (titanium dioxide) loading were evaluated relative to mechanical, thermal, and surface properties of the wood-plastic nanocomposites (WPNs). Pine wood flour, mixed with maleic anhydride polypropylene (MAPP), TiO 2 nanoparticles (0 wt%, 1 wt%, 2 wt%, 3 wt%, 4 wt%, and 5 wt%), and polypropylene, was compounded in a twin screw co-rotating extruder. The mass ratio of the wood flour to polypropylene (PP) was 50/50 (w/w) in all compounds. Test specimens were produced using injection molding machine from the pellets. Flexural and tensile properties, thermogravimetric analysis, surface roughness, wettability, and morphology of the manufactured nanocomposites were evaluated. Flexural and tensile properties of the wood-plastic nanocomposites increased with the increasing content of the TiO 2 . The surface roughness of the wood-plastic nanocomposites was reduced by increasing the content of TiO 2 . Increasing the loading of TiO 2 increased the amount of residual ash and thermal stability. |
| Anahtar Kelimeler |
| Mechanical properties | Nanocomposites | SEM | TiO 2 | Wood |
| Makale Türü | Özgün Makale |
| Makale Alt Türü | SSCI, AHCI, SCI, SCI-Exp dergilerinde yayımlanan tam makale |
| Dergi Adı | BioResources |
| Dergi ISSN | 1930-2126 |
| Dergi Tarandığı Indeksler | SCI |
| Makale Dili | İngilizce |
| Basım Tarihi | 01-2019 |
| Cilt No | 14 |
| Sayı | 1 |
| Sayfalar | 1969 / 1979 |
