| Yazarlar |
Nadir Ayrılmış
İstanbul Üniversitesi, Türkiye |
Prof. Dr. Alperen KAYMAKCI
İstanbul Üniversitesi, Türkiye |
|
Türker Dündar
İstanbul Üniversitesi, Türkiye |
|
Ferhat Özdemir
Kahramanmaraş Sütçü İmam Üniversitesi, Türkiye |
|
Jin Heon Kwon
|
| Özet |
| Mechanical, thermal, and morphological properties of injection molded wood-plastic composites (WPCs) prepared from poplar wood flour (50 wt%), thermoplastics (high density polyethlyne or polypropylene) with coupling agent (3 wt%), and hexagonal boron nitride (h-BN) (2, 4, or 6 wt%) nanopowder were investigated. The flexural and tensile properties of WPCs significantly improved with increasing content of the h-BN. Unlike the tensile and flexural properties, the notched izod impact strength of WPCs decreased with increasing content of h-BN but it was higher than that of WPCs without the h-BN. The WPCs containing h-BN were stiffer than those without h-BN. The tensile elongation at break values of WPCs increased with the addition of h-BN. The differential scanning calorimetry (DSC) analysis showed that the crystallinity, melting enthalpy, and crystallization enthalpy of the WPCs increased with increasing content of the h-BN. The increase in the crystallization peak temperature of WPCs indicated that h-BN was the efficient nucleating agent for the thermoplastic composites to increase the crystallization rate. © 2013 Society of Plastics Engineers. |
| Anahtar Kelimeler |
| Makale Türü | Özgün Makale |
| Makale Alt Türü | Uluslararası alan indekslerindeki dergilerde yayımlanan tam makale |
| Dergi Adı | Pro Ligno |
| Dergi ISSN | 2069-7430 |
| Dergi Tarandığı Indeksler | DOAJ |
| Makale Dili | İngilizce |
| Basım Tarihi | 12-2013 |
| Cilt No | 9 |
| Sayı | 4 |
| Sayfalar | 435 / 442 |
| Doi Numarası | 10.1002/pc.22650 |
| Atıf Sayıları | |
| SCOPUS | 36 |
| Google Scholar | 60 |
