Impact of PF and MUF adhesives modified with TIO2 and SIO2 on the adhesion strength
Yazarlar (3)
Ayhan Ozcifci Aksaray Üniversitesi, Türkiye
Mehmet Erdal Kara Kastamonu Entegrated Wood Company, Türkiye
Prof. Dr. Alperen KAYMAKCI Kastamonu Üniversitesi, Türkiye
| Makale Türü | Özgün Makale (SSCI, AHCI, SCI, SCI-Exp dergilerinde yayınlanan tam makale) | ||
| Dergi Adı | Wood Research (Q3) | ||
| Dergi ISSN | 1336-4561 Dergi Bilgileri (2018) | ||
| Dergi Tarandığı Indeksler | SCI | ||
| Makale Dili | İngilizce | Basım Tarihi | 01-2018 |
| Cilt / Sayı / Sayfa | 63 / 1 / 75–84 | DOI | 10.5555/20183131636 |
| UAK Araştırma Alanları |
Odun Mekaniği ve Teknolojisi
|
||
| Özet |
| The purpose of this study was to evaluate adhesion strength of phenol formaldehyde (PF) and melamine urea formaldehyde (MUF) adhesives modified with nano-technological products on the adhesion strength of different wood species. For this purpose, the effect of nano-TiO2 and nano-SiO2 on bonding performance and structural properties of PF and MUF were researched. And also, TiO2 and SiO2 chemicals were chosen as a rate of 2%, 4%, 6%, 8% within the adhesives. The bonding strength tests of the acquired Uludag fir and aspen boards were measured with a Universal Zwick Roell brand testing device in accordance with TS EN 205 standards. The obtained results showed that the highest bonding strength for Uludag fir wood was 8.27 N.mm-2 with PF adhesive mixed as 8% of SiO2 and the lowest was 5.91 N.mm-2 with MUF adhesive mixed as 2% TiO2, respectively. For aspen wood, the highest value … |
| Anahtar Kelimeler |
| Adhesives | Aspen | Fir | Nanotechnology | Strength |
BM Sürdürülebilir Kalkınma Amaçları
| Atıf Sayıları | |
| Scopus | 8 |
| Google Scholar | 13 |