| Yazarlar (2) |
Abdullah Sütçü
Türkiye |
Doç. Dr. Ümmü KARAGÖZ İŞLEYEN
Kastamonu Üniversitesi, Türkiye |
| Özet |
| This study explored the effect of processing parameters on surface roughness as a result of aesthetic designs processed on walnut, chestnut, and beech wood edge-glued panels (EGPs) by CNC (computer numerical control) router. To accomplish this, the average roughness value (Ra) on an engraved surface in a Ying-Yang design treated on the material was measured. Using analysis of variance (ANOVA), the feed rate, spindle speed, step-over, and axial depth of cut factors; surface roughness factors; and the interactions between these factors were found to form significant differences at the level of 95%. At the end of the study, the Ra value was lower in walnut and beech EGPs (3.423 μm and 4.316 μm, respectively) and higher in chestnut EGPs (5.005 μm). |
| Anahtar Kelimeler |
| Makale Türü | Özgün Makale |
| Makale Alt Türü | SSCI, AHCI, SCI, SCI-Exp dergilerinde yayınlanan tam makale |
| Dergi Adı | BioResources |
| Dergi ISSN | 1930-2126 Wos Dergi Scopus Dergi |
| Dergi Tarandığı Indeksler | SCI-Expanded |
| Makale Dili | İngilizce |
| Basım Tarihi | 01-2013 |
