Investigation of machinability properties of aluminium matrix hybrid composites
Yazarlar (3)
Dr. Öğr. Üyesi Faik OKAY Kastamonu Üniversitesi, Türkiye
Prof. Dr. Serkan ISLAK Kastamonu Üniversitesi, Türkiye
Yakup Turgut Gazi Üniversitesi, Türkiye
| Makale Türü | Özgün Makale (SSCI, AHCI, SCI, SCI-Exp dergilerinde yayınlanan tam makale) | ||
| Dergi Adı | Journal of Manufacturing Processes (Q2) | ||
| Dergi ISSN | 1526-6125 Wos Dergi Scopus Dergi | ||
| Dergi Tarandığı Indeksler | SCI-Expanded | ||
| Makale Dili | İngilizce | Basım Tarihi | 08-2021 |
| Kabul Tarihi | – | Yayınlanma Tarihi | 01-08-2021 |
| Cilt / Sayı / Sayfa | 68 / 1 / 85–94 | DOI | 10.1016/j.jmapro.2021.05.041 |
| Makale Linki | https://www.sciencedirect.com/science/article/abs/pii/S1526612521003716 | ||
| Özet |
| In this study, machinability properties of aluminium matrix boron carbide (B4C) and carbon nanofiber (CNF) reinforced hybrid composite material produced by powder metallurgy in drilling were investigated. In the study, the samples produced with hot pressing technique having 6 different volume rates were used. The drilling operations were performed using drills with 3 point angles (90°–118°–135°) at 30–45-67.5 m/min cutting speed and 0.1–0.15–0.225 mm/rev feed rate. As a result of the experiments, the thrust force, moment, and surface roughness were measured and the delamination factor forming at hole exits was calculated. In addition, the effect of reinforcement rate on the machinability was also investigated. In all drill types, it was determined that as the feed rate increased, the thrust force increased and as the reinforcement rate increased, moment values also increased. Surface roughness values … |
| Anahtar Kelimeler |
| Delamination | Drilling | Hybrid composites | Machinability | Surface roughness | Thrust force |
Science Direct
Investigation of machinability properties of aluminium matrix hybrid composites
BM Sürdürülebilir Kalkınma Amaçları
| Atıf Sayıları | |
| Web of Science | 11 |
| Scopus | 13 |
| Google Scholar | 23 |