| Yazarlar |
Doç. Dr. Mehmet AKKAŞ
Kastamonu Üniversitesi, Türkiye |
Tayfun Çetin
Hakkari Üniversitesi, Türkiye |
|
Mustafa Boz
Karabük Üniversitesi, Türkiye |
| Özet |
| In this study, the effect of gas pressure on the shape and size of the AZ91 alloy powder produced by using the gas atomization method was investigated experimentally. Experiments were carried out at 820°C constant temperature in 2-mm nozzle diameter and by applying 4 different gas pressures (0.5, 1.5, 2.5 and 3.5 MPa). Argon gas was used to atomize the melt. Scanning electron microscope (SEM) to determine the shape of produced AZ91 powders, XRD, XRF and SEM-EDX analysis to determine the phases forming in the internal structures of the produced powders and the percentages of these phases and a laser measuring device for powder size analysis were used. Hardness tests were carried out to determine the mechanical properties of the produced powders. The general appearances of AZ91 alloy powders produced had general appearances of ligament, acicular, droplet, flake and spherical shape, but depending on the increase in gas pressure, the shape of the powders is seen to change mostly towards flake and spherical. It is determined that the finest powder was obtained at 820°C with 2 mm nozzle diameter at 3.5 MPa gas pressure and the powders had complex shapes in general. |
| Anahtar Kelimeler |
| Gas atomization,AZ91 alloy powder,gas pressure,powder morphology |
| Makale Türü | Özgün Makale |
| Makale Alt Türü | SSCI, AHCI, SCI, SCI-Exp dergilerinde yayımlanan tam makale |
| Dergi Adı | ARCHIVES OF METALLURGY AND MATERIALS |
| Dergi ISSN | 1733-3490 |
| Dergi Tarandığı Indeksler | SCI-Expanded |
| Makale Dili | İngilizce |
| Basım Tarihi | 10-2018 |
| Cilt No | 63 |
| Sayı | 4 |
| Sayfalar | 1587 / 1594 |
| Doi Numarası | 10.24425/amm.2018.125081 |
| Makale Linki | http://www.imim.pl/files/archiwum/Vol4_2018/03.pdf |
| Atıf Sayıları | |
| WoS | 7 |
| SCOPUS | 7 |
| Google Scholar | 9 |
