Radiation grafting of various water soluble monomers on ultra high molecular weight polyethylene powder Part I Grafting conditions and grafting yield
Yazarlar (2)
Prof. Dr. Bahattin AYDINLI Kastamonu Üniversitesi, Türkiye
Teoman Tinçer
Middle East Technical University (Metu), Türkiye
Middle East Technical University (Metu), Türkiye
| Makale Türü | Özgün Makale (SSCI, AHCI, SCI, SCI-Exp dergilerinde yayınlanan tam makale) | ||
| Dergi Adı | Radiation Physics and Chemistry | ||
| Dergi ISSN | 0969-806X Wos Dergi Scopus Dergi | ||
| Dergi Tarandığı Indeksler | SSCI | ||
| Makale Dili | İngilizce | Basım Tarihi | 01-2001 |
| Cilt / Sayı / Sayfa | 60 / 3 / 237–243 | DOI | 10.1016/S0969-806X(00)00335-2 |
| Makale Linki | http://www.sciencedirect.com/ | ||
| Özet |
| Monomers of some water-soluble polymers; acrylic acid, methacrylic acid, acrylamide, N, N -dimethyl acrylamide and 1-vinyl-2 pyrrolidone, were grafted on ultra-high molecular weight polyethylene (UHMWPE) powders by a direct grafting method in an aqueous medium in air. Inhibition of homopolymerisation was achieved by adding various concentrations of Fe2+ or Cu2+ ions. It was found that the degree of grafting increases linearly with dose till a gelation state is reached, and varies between 40 and 12% depending on the monomer. Four million molecular weight UHMWPE gave a higher per cent grafting than a 6 million counterpart for the monomers used, with the exception of acrylic acid monomer grafting. |
| Anahtar Kelimeler |
| Radiation grafting | Ultra-high molecular weight polyethylene | Water-soluble monomers |
Science Direct
Radiation grafting of various water soluble monomers on ultra high molecular weight polyethylene powder Part I Grafting conditions and grafting yield
BM Sürdürülebilir Kalkınma Amaçları
| Atıf Sayıları | |
| Scopus | 31 |
| Google Scholar | 31 |