| Yazarlar |
Doç. Dr. Fuat KARTAL
Kastamonu Üniversitesi, Türkiye |
Muhammet Hüseyin Çetin
Karabük Üniversitesi, Türkiye |
|
Hasan Gökkaya
Karabük Üniversitesi, Türkiye |
Prof. Dr. Zekeriya YERLİKAYA
Kastamonu Üniversitesi, Türkiye |
| Özet |
| Studies to improve the machining of engineering materials have great importance for mechanical systems. Abrasive water-jet turning (AWJT) is a new and effective process for increasing machinability of engineering materials by providing temperature free cutting conditions, high surface quality and having no tool wear problem. In this study, AWJT of low density polyethylene (LDPE) material were investigated in terms of average surface roughness (ASR) and material removal rate (MRR) values and process parameters were optimized by experimental design method. The primary objectives of the study are to investigate AWJT process and system parameters to enhance machinability of LDPE material and to determine optimal processing parameters. Nozzle feed rate (5, 25 and 45 mm/min), abrasive flow rate (50, 200 and 350 g/min) and spindle speed (1000, 1500 and 2500 min-1) were analyzed as process parameters. Taguchi L |
| Anahtar Kelimeler |
| Makale Türü | Özgün Makale |
| Makale Alt Türü | SSCI, AHCI, SCI, SCI-Exp dergilerinde yayımlanan tam makale |
| Dergi Adı | International Polymer Processing |
| Dergi ISSN | 0930-777X |
| Dergi Tarandığı Indeksler | SCI-Expanded |
| Makale Dili | İngilizce |
| Basım Tarihi | 08-2014 |
| Cilt No | 29 |
| Sayı | 4 |
| Sayfalar | 535 / 544 |
| Doi Numarası | 10.3139/217.2925 |
| Makale Linki | http://www.hanser-elibrary.com/doi/abs/10.3139/217.2925 |
| Atıf Sayıları | |
| WoS | 15 |
| SCOPUS | 17 |
