| Yazarlar (1) |
Doç. Dr. Fuat KARTAL
Kastamonu Üniversitesi, Türkiye |
| Özet |
| In this study, an experimental research was carried out to reduce or eliminate the kerf taper in the AWJ machining of ductile cast iron section using a kerf-taper compensation technique. Kerf taper is a unique and unwanted geometric formation created due to abrasive water jet processing. In the experiments, ductile cast iron plate of 20mm thickness was used. The parameters; the nozzle feed speed (100, 200 and 300 mm/min), abrasive flow rate (250, 350 and 450 g/min) were explored during abrasive water jet machining. During the experimental study, the pump pressure (380 MPa), nozzle diameter (0.75 mm) and abrasive (Garnet form 80 mesh size) were held constant. Analysis of variance (ANOVA) was used to assess the data obtained in order to determine the important factors affecting the Kerf angle. The results show that the nozzle feed rate is the most significant factor in the formation of kerf. |
| Anahtar Kelimeler |
| Bildiri Türü | Tebliğ/Bildiri |
| Bildiri Alt Türü | Tam Metin Olarak Yayınlanan Tebliğ (Uluslararası Kongre/Sempozyum) |
| Bildiri Niteliği | Alanında Hakemli Uluslararası Kongre/Sempozyum |
| Bildiri Dili | İngilizce |
| Kongre Adı | 2017 WJTA-IMCA Conference Expo (New Orleans, Louisiana) |
| Kongre Tarihi | 25-10-2017 / 27-10-2017 |
| Basıldığı Ülke | |
| Basıldığı Şehir |
