The Influence of Thermal Treatment on Color Responses of Wood Materials
Yazarlar (3)
Prof. Dr. Deniz Aydemir Bartın Üniversitesi, Türkiye
Prof. Dr. Gökhan Gündüz Bartın Üniversitesi, Türkiye
Doç. Dr. Seray ÖZDEN KELEŞ Kastamonu Üniversitesi, Türkiye
| Makale Türü | Özgün Makale (SSCI, AHCI, SCI, SCI-Exp dergilerinde yayınlanan tam makale) | ||
| Dergi Adı | COLOR RESEARCH AND APPLICATION | ||
| Dergi ISSN | 0361-2317 Wos Dergi Scopus Dergi | ||
| Dergi Tarandığı Indeksler | SCI-Expanded | ||
| Makale Dili | İngilizce | Basım Tarihi | 04-2012 |
| Cilt / Sayı / Sayfa | 37 / 2 / 148–153 | DOI | 10.1002/col.20655 |
| Makale Linki | http://onlinelibrary.wiley.com/doi/10.1002/col.20655/abstract | ||
| UAK Araştırma Alanları |
Orman Botaniği
|
||
| Özet |
| In this study, the influence of thermal treatment on color changes of six different wood materials was investigated. Test specimens were subjected to three different temperatures (160, 180, and 200°C) and durations (3, 5, and 7 h). The data obtained were analyzed using variance analysis, and then the statistical analysis of Tukey's test was conducted. After this treatment, the results showed that the color values of the six wood materials changed significantly. It was determined that L* (lightness) values decreased; the minimum change in L* was ∼4% for Juniper wood, and the maximum change in L* was ∼64% for Beech wood. The values of a* (red coordinate) and b* (yellow coordinate) showed varying levels of increase when the heat treatment conditions were 160°C for 3 to 7 h (not including Cherry wood), but the values began to decrease slowly after treatment at 160°C for 5 h. The ratios of the minimum and … |
| Anahtar Kelimeler |
| thermal treatment | wood | color change | colored substances |
BM Sürdürülebilir Kalkınma Amaçları
| Atıf Sayıları | |
| Web of Science | 27 |
| Google Scholar | 54 |