Comparison of Vickers microhardness of undoped and Ru doped BSCCO glass ceramic materials

ÖZTÜRK, Özgür; AŞIKUZUN TOKEŞER, Elif; TAŞÇI, Ahmet Tolga; Gokcen, T.; Ada, H.; Koralay, H.; Cavdar, S.

doi:10.1007/s10854-017-8336-x

Comparison of Vickers microhardness of undoped and Ru doped BSCCO glass ceramic materials

Yazarlar (7)

Prof. Dr. Özgür ÖZTÜRK Kastamonu Üniversitesi, Türkiye

Doç. Dr. Elif AŞIKUZUN TOKEŞER Kastamonu Üniversitesi, Türkiye

Prof. Dr. Ahmet Tolga TAŞÇI Kastamonu Üniversitesi, Türkiye

T. Gokcen
Kastamonu Üniversitesi, Türkiye

H. Ada
Kastamonu Üniversitesi, Türkiye

H. Koralay
Gazi Üniversitesi, Türkiye

S. Cavdar
Gazi Üniversitesi, Türkiye

Makale Türü	Özgün Makale (SSCI, AHCI, SCI, SCI-Exp dergilerinde yayınlanan tam makale)
Dergi Adı	Journal of Materials Science Materials in Electronics (Q2)
Dergi ISSN	0957-4522 Dergi Bilgileri (2018)
Dergi Tarandığı Indeksler	SCI-Expanded
Makale Dili	İngilizce	Basım Tarihi	03-2018
Kabul Tarihi	–	Yayınlanma Tarihi	14-12-2017
Cilt / Sayı / Sayfa	29 / 5 / 3957–3966	DOI	10.1007/s10854-017-8336-x
Makale Linki	https://doi.org/10.1007/s10854-017-8336-x
UAK Araştırma Alanları	Yarı İletkenler

Özet

In this study, effect of substitution ratio on the mechanical and structural properties of Bi1−xRuxPb0.2Sr2CaCu2O10+δ system, that is prepared in the ratios of x = 0.0, 0.025, 0.050, 0.075, is investigated. Samples are prepared with glass ceramic method and sintered at 845 °C. XRD and SEM measurements are performed for structural analyses, and Vickers micro-hardness measurements are carried out at different applied load (0.245 ≤ F ≤ 2.940 N) in order to investigate the mechanical performance of the Ru doped Bi1−xRuxPb0.2Sr2CaCu2O10+δ system. Experimental results of Vickers micro-hardness analyses are performed using the Meyer’s law, the proportional samples resistance model, the elastic/plastic deformation model, the Hays–Kendall approach and the indentation induced cracking (IIC) model. All analyses results are exhibited reverse indentation size effect behavior. The measured hardness values increase with increasing the applied load. Finally, IIC model is determined as the most successful model describing the mechanical properties of our samples.

Anahtar Kelimeler

Pdf İndir

BM Sürdürülebilir Kalkınma Amaçları

Atıf Sayıları
Scopus	21

Comparison of Vickers microhardness of undoped and Ru doped BSCCO glass ceramic materials

Dergi Adı	JOURNAL OF MATERIALS SCIENCE-MATERIALS IN ELECTRONICS
Kısa Adı	J MATER SCI-MATER EL
Yayıncı	SPRINGER
Açık Erişim	Hayır
ISSN	0957-4522
E-ISSN	1573-482X
Wos Quartile	Q2
Scopus Quartile	Q2
Tarandığı Indeksler	SCIE , Scopus
WoS Kategoriler	ENGINEERING, ELECTRICAL & ELECTRONIC \| MATERIALS SCIENCE, MULTIDISCIPLINARY \| PHYSICS, APPLIED \| PHYSICS, CONDENSED MATTER
Scopus Kategoriler	ATOMIC AND MOLECULAR PHYSICS, AND OPTICS \| BIOMEDICAL ENGINEERING \| CONDENSED MATTER PHYSICS \| ELECTRICAL AND ELECTRONIC ENGINEERING \| ELECTRONIC, OPTICAL AND MAGNETIC MATERIALS \| BIOENGINEERING \| BIOMATERIALS \| BIOPHYSICS

Comparison of Vickers microhardness of undoped and Ru doped BSCCO glass ceramic materials

Paylaş