| Yazarlar |
Doç. Dr. Elif AŞIKUZUN TOKEŞER
Kastamonu Üniversitesi, Türkiye |
Prof. Dr. Özgür ÖZTÜRK
Kastamonu Üniversitesi, Türkiye |
| Özet |
| Zn1−xErxO polycrystalline nanoparticles with various compositions (x=0.01,0.02,0.03,0.04,0.05, and 0.10)were prepared using sol–gel techniques, for which zinc acetate dihydrate and erbium 2–4 pentanedionate are used as precursors. Nanoparticles were pressed under a pressure of 4 tons for 5 min into disk-shaped compacts with 2 mm thicknesses and 10 mm diameters. The pressed samples were annealed at 400 °C for 30 min. X-ray diffraction (XRD), scanning electron microscopy (SEM), and Vickers microhardness analyses of the produced Er-doped ZnO bulk nanomaterials were performed. Specifically, in this study we focused on the analysis of their mechanical properties. Undoped and Er-doped bulk samples were investigated according to Meyer's law; the proportional sample resistance (PSR), elastic/plastic deformation (EPD), and indentation-induced cracking (IIC) models; and the Hays–Kendal (HK) approach. As a result, the IIC model was more suitable to determine the micromechanical properties and the reverse indentation size effect (RISE) behavior of Er-doped ZnO semiconductors. |
| Anahtar Kelimeler |
| Er doping | IIC model | RISE | Sol–gel | Vickers microhardness | ZnO |
| Makale Türü | Özgün Makale |
| Makale Alt Türü | SSCI, AHCI, SCI, SCI-Exp dergilerinde yayımlanan tam makale |
| Dergi Adı | CERAMICS INTERNATIONAL |
| Dergi ISSN | 0272-8842 |
| Dergi Tarandığı Indeksler | SCI-Expanded |
| Dergi Grubu | Q1 |
| Makale Dili | İngilizce |
| Basım Tarihi | 03-2019 |
| Cilt No | 45 |
| Sayı | 4 |
| Sayfalar | 4176 / 4183 |
| Doi Numarası | 10.1016/j.ceramint.2018.11.086 |
| Makale Linki | https://linkinghub.elsevier.com/retrieve/pii/S0272884218331900 |
