Superconducting and mechanical properties of the bulk Bi pb SCCO system prepared via solid state and ammonium nitrate precipitation methods

Safran, S.; Kiliçarslan, E.; Ozturk, H.; Alp, M.; Akdogan, M.; AŞIKUZUN TOKEŞER, Elif; ÖZTÜRK, Özgür; Kiliç, A.

doi:10.1016/j.physb.2015.05.006

Superconducting and mechanical properties of the bulk Bi pb SCCO system prepared via solid state and ammonium nitrate precipitation methods

Yazarlar (8)

S. Safran
Ankara Üniversitesi, Türkiye

E. Kiliçarslan
Ankara Üniversitesi, Türkiye

H. Ozturk
Ankara Üniversitesi, Türkiye

M. Alp
Center Of Excellence For Superconductivity Research, Türkiye

M. Akdogan
Center Of Excellence For Superconductivity Research, Türkiye

Doç. Dr. Elif AŞIKUZUN TOKEŞER Kastamonu Üniversitesi, Türkiye

Prof. Dr. Özgür ÖZTÜRK Kastamonu Üniversitesi, Türkiye

A. Kiliç
Ankara Üniversitesi, Türkiye

Makale Türü	Özgün Makale (SSCI, AHCI, SCI, SCI-Exp dergilerinde yayınlanan tam makale)
Dergi Adı	Physica B Condensed Matter
Dergi ISSN	0921-4526 Wos Dergi Scopus Dergi
Dergi Tarandığı Indeksler	SCI-Expanded
Makale Dili	İngilizce	Basım Tarihi	09-2015
Cilt / Sayı / Sayfa	472 / 1 / 34–40	DOI	10.1016/j.physb.2015.05.006
Makale Linki	http://linkinghub.elsevier.com/retrieve/pii/S0921452615300557
UAK Araştırma Alanları	Yarı İletkenler

Özet

We have investigated the effect of preparation method on superconducting and mechanical properties of Bi(Pb)-2223 bulk samples using Bi1.85Pb0.35Sr2Ca2Cu3O10±y stoichiometry. Solid-state reaction and ammonium nitrate precipitation methods have been used for fabrication of the bulk samples. In addition, the effect of annealing time on BSCCO samples have been studied. Structural, electrical, magnetic and microhardness analyses of samples are performed by the X-ray powder diffraction (XRD), the Scanning Electron Microscopy (SEM), DC resistivity, AC susceptibility and Vickers microhardness test. The critical transition temperature, phase purity, surface morphology and crystallinity of the prepared bulk samples are compared with each other. Elasticity (E), brittleness (Bi), fracture toughness (KIC) and yield strength (Y) values are also determined according to annealing time, applied load and production parameters of materials.

Anahtar Kelimeler

Electrical properties | Magnetic properties | Mechanical properties | Superconductors

Pdf İndir

Science Direct

BM Sürdürülebilir Kalkınma Amaçları

Atıf Sayıları
Scopus	7

Superconducting and mechanical properties of the bulk Bi pb SCCO system prepared via solid state and ammonium nitrate precipitation methods

Dergi Adı	PHYSICA B-CONDENSED MATTER
Yayıncı	Elsevier B.V.
Açık Erişim	Hayır
ISSN	0921-4526
E-ISSN	1873-2135
CiteScore	5,0
SJR	0,506
SNIP	0,862

Superconducting and mechanical properties of the bulk Bi pb SCCO system prepared via solid state and ammonium nitrate precipitation methods

Paylaş