img
img
Hardness and microstructure properties of AlCu-B4C/hBN hybrid composites   
Yazarlar (5)
Prof. Dr. Serkan ISLAK Prof. Dr. Serkan ISLAK
Kastamonu Üniversitesi, Türkiye
Khg Awath
Ertuğrul Çelik
Munzur Üniversitesi, Türkiye
Uğur Çalıgülü
Fırat Üniversitesi, Türkiye
Dr. Öğr. Üyesi Cihan ÖZORAK Dr. Öğr. Üyesi Cihan ÖZORAK
Kastamonu Üniversitesi, Türkiye
Devamını Göster
Özet
Al alloy composites have been increasingly used in recent years in the recent years replacing many conventional metals like steel, iron, etc. in the field of automobile, aerospace, marine, high speed trains, etc. In the present work, production of AlCu, AlCu–10% hBN, AlCu–5% B4C+ 5% hBN, AlCu–10% B4C (wt) composites by hot pressing sintering techniques were studied. The composites were produced under a pressure of 35 MPa, at 550 C, and for a sintering time of 3 minutes. Hardness values were measured by hardness device. The relative densities of the composites were measured by Archimedes’ principle. Microstructure of composites were determined by optical microscope and X-ray diffraction (XRD) analysis. The results showed that addition of B4C and hBN increased the hardness of composites.
Anahtar Kelimeler
Bildiri Türü Tebliğ/Bildiri
Bildiri Alt Türü Tam Metin Olarak Yayınlanan Tebliğ (Uluslararası Kongre/Sempozyum)
Bildiri Niteliği Alanında Hakemli Uluslararası Kongre/Sempozyum
Bildiri Dili Türkçe
Kongre Adı 8th International Advanced Technologies Symposium (IATS’17)
Kongre Tarihi 19-10-2017 / 22-10-2017
Basıldığı Ülke Türkiye
Basıldığı Şehir Elazığ
BM Sürdürülebilir Kalkınma Amaçları
Atıf Sayıları

Paylaş