| Makale Türü | Özgün Makale (SSCI, AHCI, SCI, SCI-Exp dergilerinde yayınlanan tam makale) | ||
| Dergi Adı | Fresenius Environmental Bulletin (Q4) | ||
| Dergi ISSN | 1018-4619 Wos Dergi Scopus Dergi | ||
| Dergi Tarandığı Indeksler | SCI-Expanded | ||
| Makale Dili | İngilizce | Basım Tarihi | 11-2019 |
| Cilt / Sayı / Sayfa | 28 / 11 / 7823–7832 | DOI | – |
| Makale Linki | https://www.researchgate.net/profile/Oguzhan-Bayraktar/publication/337253347_Investigation_of_effect_of_brick_dust_and_silica_fume_on_the_properties_of_portland_cement_mortar/links/5dcd4eb3299bf1b74b3fd6db/Investigation-of-effect-of-brick-dust-and-si | ||
| UAK Araştırma Alanları |
Yapı ve Malzemeleri
Yapı Mekaniği
|
||
| Özet |
| In this study, the mechanical behaviors that can occur under the influence of high temperature in the mortars produced by silica fume and waste brick dust were investigated. For this purpose, Portland cement (CEM I), brick dust (BD) ofbrick factory waste, sil-ica fume (SF) ofETÍ electrometallurgy INC. indus-trial waste CEN standard sand and water were used in the production of mortar. Blended cements were obtained by using BD, SF and SFBD at 50%, 10.0%, 15.0% and 20.0% ratio with substitution method in Portland cement. Density, Blaine, initial set and final set tests were performed on the produced mortars and 40x40x160 mm sized mortar prism samples were obtained using these cements. These samples were exposed to five temperature effects as 20, 150, 300, 700 and 900 C. The mortar samples kept at 20 C were accepted as reference mortar. A total of 1053 samples were studied in two different ways of … |
| Anahtar Kelimeler |
| High temperature | Mechanical properties | Physical | Portland cement | Silica fume | Waste brick dust |
| Dergi Adı | FRESENIUS ENVIRONMENTAL BULLETIN |
| Yayıncı | Parlar Scientific Publications |
| Açık Erişim | Hayır |
| ISSN | 1018-4619 |
| E-ISSN | 1610-2304 |
| CiteScore | 0,7 |
| SJR | 0,182 |
| SNIP | 0,222 |