Preparation and characterization of flexible poly vinyl chloride foam films
Yazarlar (4)
E. Şahin
Izmir Yüksek Teknoloji Enstitüsü, Türkiye
Izmir Yüksek Teknoloji Enstitüsü, Türkiye
F. Y. Mahlicli
Izmir Yüksek Teknoloji Enstitüsü, Türkiye
Izmir Yüksek Teknoloji Enstitüsü, Türkiye
Doç. Dr. Senem YETGİN Izmir Yüksek Teknoloji Enstitüsü, Türkiye
D. Balköse
Izmir Yüksek Teknoloji Enstitüsü, Türkiye
Izmir Yüksek Teknoloji Enstitüsü, Türkiye
| Makale Türü | Özgün Makale (SSCI, AHCI, SCI, SCI-Exp dergilerinde yayınlanan tam makale) | ||
| Dergi Adı | Journal of Applied Polymer Science (Q2) | ||
| Dergi ISSN | 0021-8995 Wos Dergi Scopus Dergi | ||
| Dergi Tarandığı Indeksler | SCI-Expanded | ||
| Makale Dili | İngilizce | Basım Tarihi | 01-2012 |
| Cilt / Sayı / Sayfa | 125 / 2 / 1448–1455 | DOI | 10.1002/app.35681 |
| Makale Linki | https://onlinelibrary.wiley.com/doi/full/10.1002/app.35681 | ||
| Özet |
| In this study, the effect of activator ZnO and heating time at 190°C on foaming, gelation, and dehydrochlorination of poly(vinyl chloride) (PVC) plastisol was investigated. For this purpose, a PVC plastisol was prepared by mixing PVC, dioctyl phthalate (DOP), azodicarbonamide (ADC), ZnO, and the heat stabilizers calcium stearate (CaSt2) and zinc stearate(ZnSt2). PVC plastisol films were heated for 3, 6, 12, and 24 min periods at 190°C to see the effect of heating time on the gelation and foaming processes of the PVC foam. The time of 12 min was determined to be optimum for the completion of gelation and foaming processes without thermal degradation of PVC. No foaming was observed under the same conditions for the samples without ZnO. ZnO had a significant catalytic effect on ADC decomposition, accelerating the foaming of the films. Average porosity measurement showed a consistent increase in porosity … |
| Anahtar Kelimeler |
| azodicarbonamide | films | foaming | PVC plastisols | zinc oxide |
BM Sürdürülebilir Kalkınma Amaçları
| Atıf Sayıları | |
| Scopus | 7 |
| Google Scholar | 15 |