| Yazarlar |
Emrah Kurt
|
|
Özcelik Cenk Emrah
|
Dr. Öğr. Üyesi Senem YETGİN
Kastamonu Üniversitesi, Türkiye |
|
Ömürlü Filiz
|
|
Balkose Devrim
|
| Özet |
| Flexible PVC films are statically charged due to their low electrical conductivity. This creates fire threat during its handling. Conductive materials are added to films to prevent this. In the present study it was aimed to prepare PVC- copper composite films by sol gel technique and characterize the prepared films. It was aimed to increase the electrical conductivity of the films by adding copper powder. However, the copper particles settled down to bottom instead of forming a conductive network that covers the whole cross section. Thus at the film crosssection a plastic upper phase and a copper rich lower phase were present. The film did not conduct electricity due to this uneven distribution. The minimum volumetric and surface resistivities of the films were at the order of 109 ohm-cm and 1010 ohm square respectively. © 2013 Smithers Rapra Technology. |
| Anahtar Kelimeler |
| Conductivity | Copper powder | PVC | Static electricity |
| Makale Türü | Özgün Makale |
| Makale Alt Türü | SSCI, AHCI, SCI, SCI-Exp dergilerinde yayımlanan tam makale |
| Dergi Adı | POLYMERS & POLYMER COMPOSITES |
| Dergi ISSN | 0967-3911 |
| Dergi Tarandığı Indeksler | SCI-Expanded |
| Makale Dili | İngilizce |
| Basım Tarihi | 01-2013 |
| Cilt No | 21 |
| Sayı | 3 |
| Sayfalar | 139 / 143 |
| Doi Numarası | 10.1177/096739111302100303 |
| Makale Linki | https://apps.webofknowledge.com/full_record.do?product=UA&search_mode=GeneralSearch&qid=2&SID=Z2O5bvHFQCnFkKEx97F&page=1&doc=1 |
| Atıf Sayıları | |
| WoS | 5 |
| SCOPUS | 8 |
