The influence of re-pelletization and heat treatment on physical, superconducting, magnetic and micro-mechanical properties of bulk BSCCO samples prepared by ammonium nitrate precipitation method
Yazarlar (4)
S. Safran
Ankara Üniversitesi, Türkiye
Ankara Üniversitesi, Türkiye
H. Ozturk
Ankara Üniversitesi, Türkiye
Ankara Üniversitesi, Türkiye
F. Bulut
Kastamonu Üniversitesi, Türkiye
Kastamonu Üniversitesi, Türkiye
Prof. Dr. Özgür ÖZTÜRK Kastamonu Üniversitesi, Türkiye
| Makale Türü | Özgün Makale (SSCI, AHCI, SCI, SCI-Exp dergilerinde yayınlanan tam makale) | ||
| Dergi Adı | Ceramics International (Q1) | ||
| Dergi ISSN | 0272-8842 Dergi Bilgileri (2017) | ||
| Dergi Tarandığı Indeksler | SCI | ||
| Makale Dili | İngilizce | Basım Tarihi | 12-2017 |
| Kabul Tarihi | – | Yayınlanma Tarihi | 01-12-2017 |
| Cilt / Sayı / Sayfa | 43 / 17 / 15586–15592 | DOI | 10.1016/j.ceramint.2017.08.114 |
| Makale Linki | https://linkinghub.elsevier.com/retrieve/pii/S0272884217318096 | ||
| UAK Araştırma Alanları |
Süper İletkenler
|
||
| Özet |
| The influence of re-pelletization and annealing time on the structural, magnetic, electrical and mechanical properties of Bi-based high temperature bulk superconductor have been investigated. All samples used in this study have been prepared by a wet technique denoted as ammonium nitrate precipitation method. The samples have been characterized by X-ray powder diffraction (XRD), Scanning Electron Microscopy (SEM), resistance vs. temperature (R-T), magnetic hysteresis (M-H) and hardness vs. applied load (Hv-F) measurements. Bi-2223 and Bi-2212 peaks as major phases have been observed with small amounts of impurities from XRD results. The microstructures of most samples show a plate-like granular form. The grain sizes have been investigated by SEM and XRD. The critical transition temperature (Tc) has been obtained from resistivity measurements in the range of 99–110 K, depending on the … |
| Anahtar Kelimeler |
| Bean model | BSCCO | Critical current density | Mechanical properties | SEM | XRD |
Science Direct
The influence of re-pelletization and heat treatment on physical, superconducting, magnetic and micro-mechanical properties of bulk BSCCO samples prepared by ammonium nitrate precipitation method
BM Sürdürülebilir Kalkınma Amaçları
| Atıf Sayıları | |
| Web of Science | 20 |
| Scopus | 23 |
| Google Scholar | 31 |