Optimum Distance Between Vortex Generators Used in Modern Thermal Systems
Yazarlar (5)
Azize Akçayoğlu
Cenap Özgün Mersin Üniversitesi, Türkiye
Arş. Gör. Celal NAZLI Kastamonu Üniversitesi, Türkiye
Dr. Öğr. Üyesi Fuat Yılmaz Gaziantep Üniversitesi, Türkiye
Prof. Dr. Ali Pınarbaşı Yıldız Teknik Üniversitesi, Türkiye
| Makale Türü | Özgün Makale (Diğer hakemli uluslarası dergilerde yayınlanan tam makale) | ||
| Dergi Adı | European Scientific Journal | ||
| Dergi Tarandığı Indeksler | Google Scholar | ||
| Makale Dili | İngilizce | Basım Tarihi | 05-2014 |
| UAK Araştırma Alanları |
Akışkanlar Mekaniği
|
||
| Özet |
| Modern thermal systems in which hydrodynamics and thermal fields are strongly related to each other involve compactness and effective heating/cooling performance. Triangular ducts, having delta-wing type vortex generators (VGs) mounted on the duct’s slant surfaces, are widely used in modern thermal systems including gas turbines and electronics cooling applications. Due to the existence of completely opposite results obtained in terms of performance of the two types of VG configurations–namely “flow up” and “flow down”-, in the open literature, in the present study, both hydrodynamics and thermal fields together with the secondary flows induced by the VGs have been analysed extensively to understand which configuration has the better thermo-hydraulic performance. The results show that one configuration has a 19% higher thermo-hydraulic performance over 32 different VG configurations-containing “flow-up” and “flow-down”-for hydraulic diameter based Reynolds number, Re= 5000. The angle of inclination of each VG made with the flow direction is set to 30 and the inclined surface’s wall temperatures are set to 80 C. Based on the current results, the optimum distance between successive VGs has been determined as 0.385 of the hydraulic diameter. The present CFD results have been validated against the PIV data. |
| Anahtar Kelimeler |
