Microstructure, wear and corrosion properties of Cu–SiC/WCCo composite coatings on the Cu substrate surface by plasma spray method
Yazarlar (2)
Dr. Öğr. Üyesi Cihan ÖZORAK Kastamonu Üniversitesi, Türkiye
Prof. Dr. Serkan ISLAK Kastamonu Üniversitesi, Türkiye
| Makale Türü | Özgün Makale (SSCI, AHCI, SCI, SCI-Exp dergilerinde yayınlanan tam makale) | ||
| Dergi Adı | Materials Chemistry and Physics (Q2) | ||
| Dergi ISSN | 0254-0584 Wos Dergi Scopus Dergi | ||
| Dergi Tarandığı Indeksler | SCI-Expanded | ||
| Makale Dili | Türkçe | Basım Tarihi | 02-2024 |
| Cilt / Sayı / Sayfa | 314 / 1 / 128903–0 | DOI | 10.1016/j.matchemphys.2024.128903 |
| Makale Linki | http://dx.doi.org/10.1016/j.matchemphys.2024.128903 | ||
| Özet |
| In this study, the microstructure, wear and corrosion properties of Cu–SiC/WCCo composite coatings produced on Cu substrates by plasma spray method were investigated. In order to achieve this aim, SiC and WCCo powders were added to copper at different rates such as 5 %, 10 % and 20 % by weight. In order to determine the microstructure properties and phase distribution of the produced coatings, optical microscope, SEM-EDS and XRD analysis were investigated. The reciprocating wear method was used in order to determine the wear properties and the potentiodynamic polarization and electrochemical impedance spectroscopy (EIS) methods was used to determine the corrosion properties. The electrical conductivities of the coating layers were performed according to the eddy current principle. XRD analysis results showed that in both coating types, ceramic particles decomposed in the plasma flame and … |
| Anahtar Kelimeler |
| Composite coating | Copper | Corrosion | Plasma spray | Wear |
Science Direct
Microstructure, wear and corrosion properties of Cu–SiC/WCCo composite coatings on the Cu substrate surface by plasma spray method
BM Sürdürülebilir Kalkınma Amaçları
| Atıf Sayıları | |
| Web of Science | 23 |
| Scopus | 23 |
| Google Scholar | 22 |