| Yazarlar |
Prof. Dr. Serkan ISLAK
Kastamonu Üniversitesi, Türkiye |
Vahdettin Koç
Türkiye |
|
Abdualkarim Musbah M Gariba
|
| Özet |
| The aim of this study is to investigate the microstructure and wear properties of nickel (Ni) matrix boron carbide (B4C) and carbon nanofiber (CNF)-reinforced composite materials. Microstructure and phase composition of the composites manufactured by powder metallurgy (PM) method were determined by SEM-EDS and XRD analysis. While hardness values of the composites were determined by Vickers hardness measurement method, their wear properties were determined by using pin-on-disc method. SEM images showed that B4C was homogeneously distributed, but CNF accumulated in some areas, even though it was slight. Addition of B4C and CNF to the matrix significantly increased it. The increase was quite high in B4C addition, and hardness was slightly lower in the addition of CNF. According to the results of the wear test carried out under dry conditions, the reinforcement to the Ni matrix reduced the wear rate and friction coefficient. |
| Anahtar Kelimeler |
| Nickel,Carbon nanofiber,Boron carbide,Wear,Composites |
| Makale Türü | Özgün Makale |
| Makale Alt Türü | SSCI, AHCI, SCI, SCI-Exp dergilerinde yayımlanan tam makale |
| Dergi Adı | SCIENCE OF SINTERING |
| Dergi ISSN | 1820-7413 |
| Dergi Tarandığı Indeksler | SCI-Expanded |
| Dergi Grubu | Q3 |
| Makale Dili | İngilizce |
| Basım Tarihi | 12-2022 |
| Cilt No | 54 |
| Sayı | 4 |
| Sayfalar | 439 / 448 |
| Doi Numarası | 10.2298/SOS2204439I |
| Makale Linki | http://ojs.itn.sanu.ac.rs/index.php/scisint/issue/view/74 |
| Atıf Sayıları | |
| WoS | 1 |
| SCOPUS | 1 |
| Google Scholar | 2 |
