Yazarlar |
Durmus Kir
|
Prof. Dr. Serkan ISLAK
Kastamonu Üniversitesi |
Halis Celik
|
Ertugrul Celik
|
Özet |
The aim of this work was to investigate the effect of cBN content and sintering temperature on the transverse rupture strength (TRS) of cBN/diamond cutting tools produced by hot pressing. The segments containing different cBN content were manufactured under 35 MPa pressure at 600, 650 and 700 °C with a 3 minutes sintering time. The TRS of segments were determined using three-point bending test. Microstructure and phase composition of fracture surface of segments were determined by scanning electron microscopy (SEM), and X-ray diffraction (XRD) analysis. The obtained results show that the TRS of the segments with cBN were higher than that of the segments with diamond. |
Anahtar Kelimeler |
CBN/diamond cutting tools | Hotpressing | Trs |
Makale Türü | Özgün Makale |
Makale Alt Türü | SSCI, AHCI, SCI, SCI-Exp dergilerinde yayımlanan tam makale |
Dergi Adı | SCIENCE OF SINTERING |
Dergi ISSN | 0350-820X |
Dergi Tarandığı Indeksler | SCI-Expanded |
Makale Dili | İngilizce |
Basım Tarihi | 05-2012 |
Cilt No | 44 |
Sayı | 2 |
Sayfalar | 235 / 243 |
Doi Numarası | 10.2298/SOS1202235K |
Makale Linki | http://www.iiss.sanu.ac.rs/download/vol44_2/vol44_2_11.pdf |