Yazarlar |
Soner Buytoz
Fırat Üniversitesi, Türkiye |
Mustafa Ulutan
Eskişehir Osmangazi Üniversitesi, Türkiye |
Prof. Dr. Serkan ISLAK
Kastamonu Üniversitesi, Türkiye |
Bülent Kurt
Nevşehir Hacı Bektaş Veli Üniversitesi, Türkiye |
Osman Nuri Çelik
Eskişehir Osmangazi Üniversitesi, Türkiye |
Özet |
In this paper, wear properties of NiCrBSi-SiC coatings were investigated using the ball-on-disk wear test. In experimental study, NiCrBSi-SiC powders were sprayed using a high-velocity oxygen fuel technique on an SAE 1030 steel substrate. Powder mixtures with different weight mixing ratios, NiCrBSi + 10 wt% SiC, NiCrBSi + 20 wt% SiC and NiCrBSi + 40 wt% SiC coatings were prepared. The deposited coatings are compared in terms of their phase composition, microstructure and hardness. It is proved that the degree of mixing of the NiCrBSi and SiC components in the powder has a massive effect on the phase composition, microstructure and hardness of the coatings. Wear tests were conducted on both the uncoated and coated substrates at same normal load, speed, and wear distance. It has been determined that the coated substrates exhibit a very good tribological performance in comparison to the uncoated substrate. The increase in the adhesive wear resistance provided by the coating has been attributed to the presence of a large amount of dispersed Ni and Cr carbide and/or borides in the Ni matrix. © 2013 The Author(s). |
Anahtar Kelimeler |
HVOF | NiCrBSi-based coating | SiC powder | Wear performance |
Makale Türü | Özgün Makale |
Makale Alt Türü | SSCI, AHCI, SCI, SCI-Exp dergilerinde yayımlanan tam makale |
Dergi Adı | ARABIAN JOURNAL FOR SCIENCE AND ENGINEERING |
Dergi ISSN | 1319-8025 |
Dergi Tarandığı Indeksler | SCI-Expanded |
Makale Dili | İngilizce |
Basım Tarihi | 06-2013 |
Cilt No | 38 |
Sayı | 6 |
Sayfalar | 1481 / 1491 |
Doi Numarası | 10.1007/s13369-013-0536-y |