| Yazarlar |
Prof. Dr. Serkan ISLAK
Kastamonu Üniversitesi, Türkiye |
| Özet |
| In this study, effect of sintering temperature on transverse rupture strength (TRS) of Cu-TiC composites produced using hot pressing (HP) technique has been studied. Copper matrix composites reinforced with 10 wt.-% TiC particles were produced under a pressure of 50 MPa, at 600, 700 and 800 °C, and for a sintering time of 4 minutes, respectively. The TRS of the composites were determined using three-point bending test. SEM was used to analyze the fractured surfaces of composites. SEM results showed that with increasing sintering temperature, pores and gaps in the fractured surfaces decreased. The ultimate transverse rupture strength of Cu-TiC composites was found to increase with increasing sintering temperature. |
| Anahtar Kelimeler |
| Cu-TiC composites | Sintering temperature | TRS |
| Makale Türü | Özgün Makale |
| Makale Alt Türü | SSCI, AHCI, SCI, SCI-Exp dergilerinde yayımlanan tam makale |
| Dergi Adı | MATERIALS TESTING |
| Dergi ISSN | 0025-5300 |
| Dergi Tarandığı Indeksler | SCI-Expanded |
| Dergi Grubu | Q4 |
| Makale Dili | İngilizce |
| Basım Tarihi | 07-2015 |
| Cilt No | 57 |
| Sayı | 7 |
| Sayfalar | 663 / 665 |
| Doi Numarası | 10.3139/120.110762 |
| Makale Linki | http://www.hanser-elibrary.com/doi/10.3139/120.110762 |
| Atıf Sayıları | |
| SCOPUS | 1 |
| Google Scholar | 3 |
