Determination of Mechanical Properties of the Concrete Affected by High Temperature by Destructive and Non-Destructive Test Methods
Yazarlar (4)
Prof. Dr. Salih Yazıcıoğlu Gazi Üniversitesi, Türkiye
Dr. Öğr. Üyesi Rukiye KOÇKAR TUĞLA Kastamonu Üniversitesi, Türkiye
Prof. Dr. Bahar Demirel Fırat Üniversitesi, Türkiye
Serhat Ay
Makale Türü Açık Erişim Özgün Makale (Diğer hakemli uluslarası dergilerde yayınlanan tam makale)
Dergi Adı Turkish Journal of Science and Technolog
Dergi ISSN 1308-9080
Dergi Tarandığı Indeksler GOOGLE SCHOLAR, EBSCO, AKADEMİK DİZİN
Makale Dili İngilizce Basım Tarihi 09-2019
Cilt / Sayı / Sayfa 14 / 2 / – DOI
UAK Araştırma Alanları
Yapı Malzemeleri
Özet
In this study, the effects of the elevated temperature on concrete specimens prepared with different aggregate types were investigated. For this purpose, 4 different series were prepared by using CEM I 42,5 (N) type Portland Cement and four different types of aggregates (basaltic crushed aggregate, stream aggregate, limestone and pumice as lightweight aggregate). 100 mm and 150 mm cube concrete samples were prepared for each series.   When reached the specified curing age, prepared each concrete specimen was taken from the curing pool and exposed to high temperatures of 300 ºC, 600 ºC and 900 ºC respectively.   Control specimens of each series were stored at room temperature. The compressive strengths, ultrasonic pulse velocity and the adherence strength of the concrete samples exposed to these temperatures were examined. At the end of this study, the compressive strengths of the series exposed to high temperature are compared. It is observed that the series which is produced with basaltic crushed aggregate is least affected and the series which is produced with lightweight aggregate is the most affected from the elevated temperature. Pull-out tests were carried out to the all prepared series and it was found that the adherence strength between the concrete and the reinforcement decreased as the temperature increased.
Anahtar Kelimeler
BM Sürdürülebilir Kalkınma Amaçları
Atıf Sayıları
Google Scholar 3

Paylaş