img
Microstructure and wear properties of FeW-SiC based composite coating produced with Tungsten inert gas (TIG) surfacing method   
Yazarlar
Prof. Dr. Serkan ISLAK
Kastamonu Üniversitesi
Dr. Öğr. Üyesi Özkan ESKİ
Kastamonu Üniversitesi
S. Buytoz
Özet
In this study, SiC reinforced and FeW based metal matrix composite (MMC) was produced on substrate of AISI 304 stainless steel using tungsten inert gas (TIG) surfacing process. In order to examine the effect of SiC on microstructure, hardness and abrasive wear properties inside FeW matrix, SiC was changed by ratios of 10, 25, and 50% by weight. Phase compound and microstructure of coating layers were examined using X-ray diffractometer (XRD) and scanning electron microscope (SEM). Wear behaviours of samples were evaluated using pin-on disc sliding wear tests. It was found that Fe2C, Cr7C3, W2C carbide and Fe2Si, CrSi2 silica were formed in the microstructure. The studies conducted concluded that FeW-25 wt. % SiC composite coating was the most appropriate combination in terms of hardness and wear performance.
Anahtar Kelimeler
Metal-matrix composite | Microstructure | TIG coating | Wear
Makale Türü Özgün Makale
Makale Alt Türü ESCI dergilerinde yayımlanan tam makale
Dergi Adı OPTOELECTRONICS AND ADVANCED MATERIALS-RAPID COMMUNICATIONS
Dergi ISSN 1842-6573
Makale Dili İngilizce
Basım Tarihi 05-2011
Cilt No 5
Sayı 5
Sayfalar 665 / 672
BM Sürdürülebilir Kalkınma Amaçları
Atıf Sayıları
WoS 4
SCOPUS 3

Paylaş