DESIGN AND APPLICATION OF AC/DC SWITCHING POWER SUPPLY WITH HALF BRIDGE DC/DC CONVERTER TOPOLOGY FOR BATTERY SYSTEMS of ELECTRICAL VEHICLE
Yazarlar (3)
Öğr. Gör. Celaletdin AKGÜL Kastamonu Üniversitesi
Doç. Dr. Yücel ÇETİNCEVİZ Kastamonu Üniversitesi, Türkiye
Erdal Şehirli
Kastamonu Üniversitesi, Türkiye
Kastamonu Üniversitesi, Türkiye
| Makale Türü |
Özgün Makale
(Ulusal alan endekslerinde (TR Dizin, ULAKBİM) yayınlanan tam makale)
|
||
| Dergi Adı | Journal of Scientific Reports-A | ||
| Dergi ISSN | 2687-6167 | ||
| Dergi Tarandığı Indeksler | TR DİZİN | ||
| Makale Dili | Türkçe | Basım Tarihi | 03-2023 |
| Cilt / Sayı / Sayfa | – / 52 / 149–173 | DOI | 10.59313/jsr-a.1213162 |
| Makale Linki | https://doi.org/10.59313/jsr-a.1213162 | ||
| UAK Araştırma Alanları |
Güç Elektroniği
|
||
| Özet |
| This study presents design, analysis and application details of electrical vehicle battery charge device based on half bridge DC-DC converter. Half bridge DC-DC converter in the paper has 620 W power, 25 kHz switching frequency and input DC voltage is obtained by uncontrolled bridge rectifier. In addition, information about the battery that is charged, and battery pack are given. Besides, a protection structure of battery is added by measuring both current and voltage of battery. Firstly, equations required for half bridge DC-DC converter is derived and simulation of battery charge circuit is realized by using PSIM and MATLAB/Simulink. Then, the results of the experimental study and the simulation results are given comparatively. The experimental results prove the accuracy of the simulation studies. |
| Anahtar Kelimeler |
| Half Bridge DC/DC Converter | Electrical Vehicle | Battery | MATLAB/Simulink | Application |
BM Sürdürülebilir Kalkınma Amaçları
| Atıf Sayıları |