Wear properties and synthesis of crfenimoti high entropy alloy coatings produced by TIG process
Yazarlar (4)
Prof. Dr. Serkan ISLAK Kastamonu Üniversitesi, Türkiye
Dr. Öğr. Üyesi Özkan ESKİ Kastamonu Üniversitesi, Türkiye
Vahdettin Koç Adiyaman Üniversitesi, Türkiye
Dr. Öğr. Üyesi Cihan ÖZORAK Kastamonu Üniversitesi, Türkiye
| Makale Türü |
Özgün Makale
(SCOPUS dergilerinde yayınlanan tam makale)
|
||
| Dergi Adı | Indian Journal of Engineering and Materials Sciences | ||
| Dergi ISSN | 0971-4588 Wos Dergi Scopus Dergi | ||
| Makale Dili | İngilizce | Basım Tarihi | 06-2020 |
| Cilt / Sayı / Sayfa | 27 / 3 / 659–664 | DOI | – |
| Makale Linki | http://op.niscpr.res.in/index.php/IJEMS/article/download/45065/465478620 | ||
| Özet |
| The aim of this study is to investigate wear and microstructure properties of CrFeNiMoTi high entropy alloy coating produced by using tungsten inert gas (TIG) process on the medium carbon steel. The coatings have been compared in terms of their phase composition, microstructure, and hardness. Phase compound and microstructure of coating layers have been examined by using X-ray diffractometer (XRD), scanning electron microscope (SEM), and optical microscope (OM). The images show that the coatings have consisted of the cladding zone, interface zone, and heat affected zone. Also, the microstructure of the coating has been mainly composed of dendrite and discontinuous interdendritic segregation. The surface microhardness of this high entropy alloys up to 450 HV0. 3, has been about 2.5 times as the substrate. The wear behaviour of the specimens has been compared through dry sliding wear tests under the same conditions. Average coefficient of friction values of the high entropy alloy (HEA) coating has been obtained at relatively low levels. |
| Anahtar Kelimeler |
| CrFeNiMoTi | HEA coating | Microstructure | TIG process | Wear |
