Investigation of the Usability of Cubic Boron Nitride Cutting Tools as an Alternative to Diamond Cutting Tools for the Aircraft Industry
Yazarlar (3)
Prof. Dr. Serkan ISLAK Kastamonu Üniversitesi, Türkiye
D. Kir
Kocaeli Üniversitesi, Türkiye
Kocaeli Üniversitesi, Türkiye
H. Çelik
Firat Üniversitesi, Türkiye
Firat Üniversitesi, Türkiye
| Makale Türü |
Özgün Makale
(SSCI, AHCI, SCI, SCI-Exp dergilerinde yayınlanan tam makale)
|
||
| Dergi Adı | Archives of Metallurgy and Materials (Q2) | ||
| Dergi ISSN | 1733-3490 Dergi Bilgileri (2013) | ||
| Dergi Tarandığı Indeksler | SCI-Expanded | ||
| Makale Dili | İngilizce | Basım Tarihi | 01-2013 |
| Kabul Tarihi | – | Yayınlanma Tarihi | 01-12-2013 |
| Cilt / Sayı / Sayfa | 58 / 4 / 1119–1123 | DOI | 10.2478/amm-2013-0135 |
| Makale Linki | http://www.degruyter.com/view/j/amm.2013.58.issue-4/amm-2013-0135/amm-2013-0135.xml | ||
| UAK Araştırma Alanları |
Toz Metalurjisi
|
||
| Özet |
| Diamond and cubic boron nitride cBN cutting segments were produced using hot pressing technique for this study to be used in cutting natural stone. cBN grains were added to bronze powder, the chosen matrix, at a rate of 0%, 20%, 40%, 60%, 80%, and 100% (according to percentage by weight). Segments were produced under a pressure of 35 MPa, at a sintering temperature of 600°C, over a sintering time of 3 minutes. The cutting properties of the produced segments were determined by cutting Ankara andesite. A Scanning Electron Microscope SEM and an X-Ray Diffractometer XRD were used to analyse the microstructure, phase compound, and wear surfaces of each segment type. |
| Anahtar Kelimeler |
| CBN cutting tools | Hot-pressing technique | Wear |
BM Sürdürülebilir Kalkınma Amaçları
| Atıf Sayıları | |
| Web of Science | 6 |
| Scopus | 7 |
| Google Scholar | 11 |