Influence of Vacuum Gas Nitriding on Wear and Corrosion Behavior of a High Manganese Steel
Yazarlar (2)
Dr. Öğr. Üyesi Cihangir Tevfik SEZGİN Kastamonu Üniversitesi, Türkiye
Fatih Hayat Karabük Üniversitesi, Türkiye
| Makale Türü | Özgün Makale (SSCI, AHCI, SCI, SCI-Exp dergilerinde yayınlanan tam makale) | ||
| Dergi Adı | Journal of Materials Engineering and Performance (Q3) | ||
| Dergi ISSN | 1059-9495 Wos Dergi Scopus Dergi | ||
| Dergi Tarandığı Indeksler | SCI-Expanded | ||
| Makale Dili | İngilizce | Basım Tarihi | 01-2026 |
| Cilt / Sayı / Sayfa | 35 / 1 / 400–420 | DOI | 10.1007/s11665-025-11599-3 |
| Makale Linki | https://doi.org/10.1007/s11665-025-11599-3 | ||
| Özet |
| In this study, the wear and corrosion behavior of gas-nitrided high manganese steel (HMS) was investigated. Vacuum gas nitriding was carried out for surface treatment of HMS at 520 and 570 °C for 12, 18 and 24 h. The base metal contained α and ε martensite, while austenite was also observed in heat-treated base metal. Although all gas-nitrided samples contain Fe3N, Fe4N, γ, α and ε martensite, FeSi phase was only determined in N1-N6 samples. Expanded martensite and white layer (complex S phase) were observed in N1-N6 and N7-12, respectively. The gas-nitriding process significantly increased the surface hardness of HMS due to the iron nitride. Daimler-Benz Rockwell-C adhesion test shows that gas-nitriding HMS has sufficient adhesion behavior. The gas-nitriding process increases the wear and corrosion resistance of the HMS significantly. |
| Anahtar Kelimeler |
| corrosion | gas nitriding | high manganese steel | wear |
BM Sürdürülebilir Kalkınma Amaçları
| Atıf Sayıları | |
| Web of Science | 1 |
| Google Scholar | 1 |