Mezbaha Atıksularından Elektrooksidasyon Sistemi ile KOİ ve Renk Giderilmesi Üzerine pH ve Akım Yoğunluğunun Etkisi
Yazarlar (3)
Öğr. Gör. Sermin GÜNASLAN İstanbul Beykent Üniversitesi, Türkiye
Prof. Dr. Baybars Ali Fil Balıkesir Üniversitesi, Türkiye
Makale Türü Açık Erişim Özgün Makale (Diğer hakemli uluslarası dergilerde yayınlanan tam makale)
Dergi Adı European Journal of Science and Technology
Dergi ISSN 2148-2683
Dergi Tarandığı Indeksler Index Copernicus, Scilit, Sobiad
Makale Dili Türkçe Basım Tarihi 05-2022
Kabul Tarihi Yayınlanma Tarihi 02-05-2022
Cilt / Sayı / Sayfa – / 36 / – DOI 10.31590/ejosat.1111639
Makale Linki https://dergipark.org.tr/tr/download/article-file/2407697
UAK Araştırma Alanları
Çevre Biyoteknolojisi Su Kirliliği ve Kontrolü Su Kirliliği ve Kontrolü
Özet
In the study, the effect of current density (4, 06, 6, 09, 8, 12, 10, 15 ve 12, 18 mA/cm2) and pH (3, 0,~ 7, 0 (natural), 9, 0, and 11, 0), which are important parameters affecting the removal performance of the system, while removing chemical oxygen demand (COD) and color from slaughterhouse wastewater with the electrooxidation system was investigated. Sieve type Ti/Pt was used as anode material and sieve type uncoated Ti was used as cathode material. According to the results obtained from laboratory experiments, COD and color removal increased with the increase of applied current density. This can be attributed to the characteristic of the electrooxidation system, in which both direct and mediated oxidation reactions play an important role. It was found that the removal efficiencies depend not only on the initial pH but also, on the pH after the reaction completion. It has been observed that the removal efficiencies of the system are better in neutral and weakly basic conditions, and it is relatively low in strongly basic conditions, and current density and pH are effective parameters in the treatment of slaughterhouse wastewater by the lab-scale electrooxidation system.
Anahtar Kelimeler