A review of 2019 fuel cell technologies: Modelling and controlling
Yazarlar (4)
Thu Thi Pham Institute For Nanotechnology (Int)
Dr. Öğr. Üyesi Fatemeh MOLLAAMIN Institute For Nanotechnology (Int)
Prof. Dr. Majıd MONAJJEMI Islamic Azad University, Central Tehran Branch, İran
Chien Mau Dang
Viet Nam National University Ho Chi Minh City
Viet Nam National University Ho Chi Minh City
| Makale Türü | Özgün Makale (SCOPUS dergilerinde yayınlanan tam makale) | ||
| Dergi Adı | International Journal of Nanotechnology | ||
| Dergi ISSN | 1475-7435 Wos Dergi Scopus Dergi | ||
| Makale Dili | İngilizce | Basım Tarihi | 01-2020 |
| Cilt / Sayı / Sayfa | 17 / 7 / 498–513 | DOI | 10.1504/IJNT.2020.111320 |
| Özet |
| Ion transport rates of direct forming acid (DFAFC), phosphoric acid (PAFC), alkaline (AFC), proton exchange membrane (PEMFC), direct methanol (DMFC) and solid oxide (SOFC) fuel cells have been studied. AFC which uses an aqueous alkaline electrolyte is suitable for temperature below 90° and is appropriate for higher current applications, while PEMFC is suitable for lower temperature compared to others. Not only are fuel cells clean energy for environment, but they can also have more than two times the efficiency of traditional combustion technologies. However, despite current developments, these technologies are not mature enough to be significantly into the energy market to replace petroleum. Hydrogen is an important energy carrier and a strong candidate for energy storage. It will be a useful tool for storing intermittent energy sources such as solar radiation. Hydrogen is a versatile energy carrier that can be used to power nearly every end-use energy need. By this work, modelling and controlling of ion transport rate efficiencies in PEMFC, AFC, DMFC, PAFC, DFAFC, direct carbon fuel cell (DCFC) and molten carbonate fuel cells (MCFC) have been investigated and compared. Thermodynamic equations have been investigated for those fuel cells from the viewpoint of voltage output data. Effects of operating data including temperature (T), pressure (P), proton exchange membrane water content (λ), and proton exchange membrane thickness (d |
| Anahtar Kelimeler |
| AFC | Controlling | DFAFC | DMFC | Fuel cells technologies | Green energies | Hybrid batteries | Modelling | PAFC | PEMFC | Proton exchange | Traditional combustion technologies |
BM Sürdürülebilir Kalkınma Amaçları
| Atıf Sayıları | |
| Web of Science | 7 |
| Scopus | 8 |