Design And Construction of a Sampling System that can Collect PM10, PM2. 5 and PM1Samples Simultaneously from Atmosphere
Yazarlar (1)
Doç. Dr. Ömer Faruk ATEŞ Kastamonu Üniversitesi, Türkiye
| Makale Türü |
Özgün Makale
(Uluslararası alan indekslerindeki dergilerde yayınlanan tam makale)
|
||
| Dergi Adı | PQDT-Global | ||
| Makale Dili | – | Basım Tarihi | 01-2019 |
| Makale Linki | https://search.proquest.com/openview/4de20f608f8b383bfd1e314d01a10ba0/1?pq-origsite=gscholar&cbl=2026366&diss=y | ||
| UAK Araştırma Alanları |
Güney-Batı (Oğuz) Türk Lehçeleri ve Edebiyatları
|
||
| Özet |
| Design And Construction of a Sampling System that can Collect PM 10, PM 2.5 and PM 1 Samples Simultaneously from AtmosphereAbstractIn this study, a particulate matter (PM) sampling system that can collect PM 10 (particulate matter with diameter of less than 10 μm), PM 2.5 and PM 1 samples simultaneously with a single pump on separate filters was constructed and validated. The sampler consisted of a F&J Specialty DF-1E carbon vane vacuum pump, with a flowrate of 115 L/min, and 3 channels connected to the pump through a manifold. Each channel had a cyclone, a filter holder of 47 mm diameter, a micro-orifice (critical orifice) for velocity control and a flowmeter. Diameter of the particles were controlled by the cyclones. The particles passing through the cyclones was collected at the filters. The sampler was first constructed with MFCs, then MFCs were replaced with critical orifices. Afterwards, components … |
| Anahtar Kelimeler |
