The investigation of mechanical properties of B4C-reinforced AlSi7 foams
Yazarlar (5)
Prof. Dr. Arif UZUN Kastamonu Üniversitesi, Türkiye
Prof. Dr. Mehmet Türker Gazi Üniversitesi, Türkiye
Fahrettin Fatih Kesmezacar Türkiye
Hakan Amasya Türkiye
Burçak Yavuz Türkiye
| Makale Türü | Özgün Makale (SSCI, AHCI, SCI, SCI-Exp dergilerinde yayınlanan tam makale) | ||
| Dergi Adı | International Journal of Materials Research | ||
| Dergi ISSN | 1862-5282 Wos Dergi Scopus Dergi | ||
| Dergi Tarandığı Indeksler | SCI-Expanded | ||
| Makale Dili | İngilizce | Basım Tarihi | 09-2015 |
| Kabul Tarihi | – | Yayınlanma Tarihi | 10-09-2015 |
| Cilt / Sayı / Sayfa | 106 / 9 / 970–977 | DOI | 10.3139/146.111257 |
| Makale Linki | http://www.hanser-elibrary.com/doi/10.3139/146.111257 | ||
| Özet |
| In this study, the mechanical properties of B4C-reinforced AlSi7 foams produced by using a powder metallurgy method were investigated. For this purpose, Al foams containing B4C at various ratios (0, 2, 4 and 6 %) were prepared with dimensions of 30 × 30 × 14 mm and 110 × 15 × 14 mm for compression and bending tests. Both tests were performed at a 1 mm min–1 strain rate. According to the experimental results, the compressive stress of B4C-reinforced/unreinforced AlSi7 foams, whose relative densities were close to each other, for 10 % strain increased about 15 % with the addition of B4C. Although energy absorption values of B4C-reinforced/unreinforced AlSi7 foams were in a complex correlation for 60 % strain, the amount of absorption energy increased with the increase in relative density and the amount of B4C. Bending strength increased due to strain hardening that occurs with the addition of B4C to … |
| Anahtar Kelimeler |
| AlSi7 foam | B4C | Compressive behavior | Mechanical properties |
| Atıf Sayıları | |
| Web of Science | 5 |
| Scopus | 1 |
| Scopus | 2 |
| Google Scholar | 12 |