Türkçe
Türkçe
English
Anasayfa
Gelişmiş Arama
Akademisyen Arama
Yayın Arama
Proje Arama
Fikri Mülkiyet Arama
Ödül Arama
Tez Arama
BM Sürdürülebilir Kalkınma Amaçları
Raporlar ve İstatistikler
Unis İletişim
Giriş
Giriş
Yayın Arama
Prof. Dr.
Doç. Dr.
Dr. Öğr. Üyesi
Öğr. Gör. Dr.
Öğr. Gör.
Arş. Gör. Dr.
Arş. Gör.
Diğer
Toplam 24353 kayıt
Performance evaluation of the submerged abrasive water jet turning process for improving machinability of castamide
Link
DOI
Ibrahim, S.A., Korkmaz, S., Çetin, M.H.,
KARTAL, F.
(2020) "
Performance evaluation of the submerged abrasive water jet turning process for improving machinability of castamide
",
ENGINEERING SCIENCE AND TECHNOLOGY-AN INTERNATIONAL JOURNAL-JESTECH
, 23 (4) pp. 801-811
[SCI Expanded]
Link
DOI
" data-bs-content-id="YazarBilgi-20115">
Ibrahim, S.A., Korkmaz, S., Çetin, M.H.,
KARTAL, F.
(2020) "
Performance evaluation of the submerged abrasive water jet turning process for improving machinability of castamide
",
ENGINEERING SCIENCE AND TECHNOLOGY-AN INTERNATIONAL JOURNAL-JESTECH
, 23 (4) pp. 801-811
[SCI Expanded]
Link
DOI
Ibrahim, S.A., Korkmaz, S., Çetin, M.H.,
KARTAL, F.
(2020) "
Performance evaluation of the submerged abrasive water jet turning process for improving machinability of castamide
",
ENGINEERING SCIENCE AND TECHNOLOGY-AN INTERNATIONAL JOURNAL-JESTECH
, 23 (4) pp. 801-811
[SCI Expanded]
Link
DOI
Kurum Bilgileri
Mühendislik ve Mimarlık Fakültesi
Makine Mühendisliği
Konstrüksiyon ve İmalat
Özgeçmiş Sayfası
2020
Özgün Makale
SCI/SSCI/AHCI
ESCI
Scopus
ENGINEERING SCIENCE AND TECHNOLOGY-AN INTERNATIONAL JOURNAL-JESTECH
The Effect of Fill Rate on Mechanical Properties of PLA Printed Samples
Link
Kaptan, A.,
KARTAL, F.
(2020) "
The Effect of Fill Rate on Mechanical Properties of PLA Printed Samples
",
Journal of the Institute of Science and Technology
, (0) pp. 1919-1927
[TR Dizin]
Link
" data-bs-content-id="YazarBilgi-20116">
Kaptan, A.,
KARTAL, F.
(2020) "
The Effect of Fill Rate on Mechanical Properties of PLA Printed Samples
",
Journal of the Institute of Science and Technology
, (0) pp. 1919-1927
[TR Dizin]
Link
Kaptan, A.,
KARTAL, F.
(2020) "
The Effect of Fill Rate on Mechanical Properties of PLA Printed Samples
",
Journal of the Institute of Science and Technology
, (0) pp. 1919-1927
[TR Dizin]
Link
Kurum Bilgileri
Mühendislik ve Mimarlık Fakültesi
Makine Mühendisliği
Konstrüksiyon ve İmalat
Özgeçmiş Sayfası
2020
Özgün Makale
SCI/SSCI/AHCI
ESCI
Scopus
Journal of the Institute of Science and Technology
Study and evaluation of abrasive water jet turning process performance on AA5083
Link
DOI
KARTAL, F.
(2020) "
Study and evaluation of abrasive water jet turning process performance on AA5083
",
Materialwissenschaft und Werkstofftechnik
, 51 (2) pp. 212-220
[SCI Expanded]
Link
DOI
" data-bs-content-id="YazarBilgi-20117">
KARTAL, F.
(2020) "
Study and evaluation of abrasive water jet turning process performance on AA5083
",
Materialwissenschaft und Werkstofftechnik
, 51 (2) pp. 212-220
[SCI Expanded]
Link
DOI
KARTAL, F.
(2020) "
Study and evaluation of abrasive water jet turning process performance on AA5083
",
Materialwissenschaft und Werkstofftechnik
, 51 (2) pp. 212-220
[SCI Expanded]
Link
DOI
Kurum Bilgileri
Mühendislik ve Mimarlık Fakültesi
Makine Mühendisliği
Konstrüksiyon ve İmalat
Özgeçmiş Sayfası
2020
Özgün Makale
SCI/SSCI/AHCI
ESCI
Scopus
Materialwissenschaft und Werkstofftechnik
Examination of the Effect of Surface Roughness of Parts Produced in the Different Nozzle Temperatures on 3d Printers
DOI
KARTAL, F.
(2019) "
Examination of the Effect of Surface Roughness of Parts Produced in the Different Nozzle Temperatures on 3d Printers
",
Evolutions in Mechanical Engineering
, 2 (4)
DOI
" data-bs-content-id="YazarBilgi-20118">
KARTAL, F.
(2019) "
Examination of the Effect of Surface Roughness of Parts Produced in the Different Nozzle Temperatures on 3d Printers
",
Evolutions in Mechanical Engineering
, 2 (4)
DOI
KARTAL, F.
(2019) "
Examination of the Effect of Surface Roughness of Parts Produced in the Different Nozzle Temperatures on 3d Printers
",
Evolutions in Mechanical Engineering
, 2 (4)
DOI
Kurum Bilgileri
Mühendislik ve Mimarlık Fakültesi
Makine Mühendisliği
Konstrüksiyon ve İmalat
Özgeçmiş Sayfası
2019
Özgün Makale
SCI/SSCI/AHCI
ESCI
Scopus
Evolutions in Mechanical Engineering
Computer Controlled Profile Cutting Machine Design and Prototype Manufacturing
DOI
KARTAL, F.
, Boz, A. (2019) "
Computer Controlled Profile Cutting Machine Design and Prototype Manufacturing
",
Evolutions in Mechanical Engineering
, 3 (1)
DOI
" data-bs-content-id="YazarBilgi-20119">
KARTAL, F.
, Boz, A. (2019) "
Computer Controlled Profile Cutting Machine Design and Prototype Manufacturing
",
Evolutions in Mechanical Engineering
, 3 (1)
DOI
KARTAL, F.
, Boz, A. (2019) "
Computer Controlled Profile Cutting Machine Design and Prototype Manufacturing
",
Evolutions in Mechanical Engineering
, 3 (1)
DOI
Kurum Bilgileri
Mühendislik ve Mimarlık Fakültesi
Makine Mühendisliği
Konstrüksiyon ve İmalat
Özgeçmiş Sayfası
2019
Özgün Makale
SCI/SSCI/AHCI
ESCI
Scopus
Evolutions in Mechanical Engineering
Evaluation of explosion pressure of portable small liquefied petroleum gas cylinder
Link
DOI
KARTAL, F.
(2020) "
Evaluation of explosion pressure of portable small liquefied petroleum gas cylinder
",
PROCESS SAFETY PROGRESS
, 39 (2)
[SCI Expanded]
Link
DOI
" data-bs-content-id="YazarBilgi-20120">
KARTAL, F.
(2020) "
Evaluation of explosion pressure of portable small liquefied petroleum gas cylinder
",
PROCESS SAFETY PROGRESS
, 39 (2)
[SCI Expanded]
Link
DOI
KARTAL, F.
(2020) "
Evaluation of explosion pressure of portable small liquefied petroleum gas cylinder
",
PROCESS SAFETY PROGRESS
, 39 (2)
[SCI Expanded]
Link
DOI
Kurum Bilgileri
Mühendislik ve Mimarlık Fakültesi
Makine Mühendisliği
Konstrüksiyon ve İmalat
Özgeçmiş Sayfası
2020
Özgün Makale
SCI/SSCI/AHCI
ESCI
Scopus
PROCESS SAFETY PROGRESS
Design Optimization of Machining Parameters for AWJ Turning Operations of 718 Inconel Super alloy Based on the Taguchi
KARTAL, F.
(2018) "
Design Optimization of Machining Parameters for AWJ Turning Operations of 718 Inconel Super alloy Based on the Taguchi
",
International Journal of Engineering Researchand Development
, 10 (1) pp. 148-156
[TR Dizin]
" data-bs-content-id="YazarBilgi-20121">
KARTAL, F.
(2018) "
Design Optimization of Machining Parameters for AWJ Turning Operations of 718 Inconel Super alloy Based on the Taguchi
",
International Journal of Engineering Researchand Development
, 10 (1) pp. 148-156
[TR Dizin]
KARTAL, F.
(2018) "
Design Optimization of Machining Parameters for AWJ Turning Operations of 718 Inconel Super alloy Based on the Taguchi
",
International Journal of Engineering Researchand Development
, 10 (1) pp. 148-156
[TR Dizin]
Kurum Bilgileri
Mühendislik ve Mimarlık Fakültesi
Makine Mühendisliği
Konstrüksiyon ve İmalat
Özgeçmiş Sayfası
2018
Özgün Makale
SCI/SSCI/AHCI
ESCI
Scopus
International Journal of Engineering Researchand Development
YAPIM ZAMANI İÇİN ERİMİŞ BİRİKİM MODELLEME İŞLEMPARAMETRELERİNİN OPTİMİZASYONU
KARTAL, F.
, NAZLI, C., YERLİKAYA, Z., Şimşek, F., Çetin, M.H. (2018) "
YAPIM ZAMANI İÇİN ERİMİŞ BİRİKİM MODELLEME İŞLEMPARAMETRELERİNİN OPTİMİZASYONU
",
INTERNATIONAL JOURNAL OF 3D PRINTING TECHNOLOGIES AND DIGITAL INDUSTRY
, 2 (1) pp. 97-104
" data-bs-content-id="YazarBilgi-20122">
KARTAL, F.
, NAZLI, C., YERLİKAYA, Z., Şimşek, F., Çetin, M.H. (2018) "
YAPIM ZAMANI İÇİN ERİMİŞ BİRİKİM MODELLEME İŞLEMPARAMETRELERİNİN OPTİMİZASYONU
",
INTERNATIONAL JOURNAL OF 3D PRINTING TECHNOLOGIES AND DIGITAL INDUSTRY
, 2 (1) pp. 97-104
KARTAL, F.
, NAZLI, C., YERLİKAYA, Z., Şimşek, F., Çetin, M.H. (2018) "
YAPIM ZAMANI İÇİN ERİMİŞ BİRİKİM MODELLEME İŞLEMPARAMETRELERİNİN OPTİMİZASYONU
",
INTERNATIONAL JOURNAL OF 3D PRINTING TECHNOLOGIES AND DIGITAL INDUSTRY
, 2 (1) pp. 97-104
Kurum Bilgileri
Mühendislik ve Mimarlık Fakültesi
Makine Mühendisliği
Konstrüksiyon ve İmalat
Özgeçmiş Sayfası
2018
Özgün Makale
SCI/SSCI/AHCI
ESCI
Scopus
INTERNATIONAL JOURNAL OF 3D PRINTING TECHNOLOGIES AND DIGITAL INDUSTRY
Eğitim Tipi CNC Freze Tezgâhı Prototip Tasarımı ve İmalatı
KARTAL, F.
(2016) "
Eğitim Tipi CNC Freze Tezgâhı Prototip Tasarımı ve İmalatı
",
Bartın Üniversitesi Mühendislik ve Teknoloji Bilimleri Dergisi
, 4 (1)
" data-bs-content-id="YazarBilgi-20123">
KARTAL, F.
(2016) "
Eğitim Tipi CNC Freze Tezgâhı Prototip Tasarımı ve İmalatı
",
Bartın Üniversitesi Mühendislik ve Teknoloji Bilimleri Dergisi
, 4 (1)
KARTAL, F.
(2016) "
Eğitim Tipi CNC Freze Tezgâhı Prototip Tasarımı ve İmalatı
",
Bartın Üniversitesi Mühendislik ve Teknoloji Bilimleri Dergisi
, 4 (1)
Kurum Bilgileri
Mühendislik ve Mimarlık Fakültesi
Makine Mühendisliği
Konstrüksiyon ve İmalat
Özgeçmiş Sayfası
2016
Özgün Makale
SCI/SSCI/AHCI
ESCI
Scopus
Bartın Üniversitesi Mühendislik ve Teknoloji Bilimleri Dergisi
Effects of machining parameters on surface roughness and macro surface characteristics when the machining of Al-6082 T6 alloy using AWJT
Link
DOI
KARTAL, F.
, YERLİKAYA, Z., Gökkaya, H. (2017) "
Effects of machining parameters on surface roughness and macro surface characteristics when the machining of Al-6082 T6 alloy using AWJT
",
MEASUREMENT
, 95 (1) pp. 216-222
[SCI Expanded]
Link
DOI
" data-bs-content-id="YazarBilgi-20124">
KARTAL, F.
, YERLİKAYA, Z., Gökkaya, H. (2017) "
Effects of machining parameters on surface roughness and macro surface characteristics when the machining of Al-6082 T6 alloy using AWJT
",
MEASUREMENT
, 95 (1) pp. 216-222
[SCI Expanded]
Link
DOI
KARTAL, F.
, YERLİKAYA, Z., Gökkaya, H. (2017) "
Effects of machining parameters on surface roughness and macro surface characteristics when the machining of Al-6082 T6 alloy using AWJT
",
MEASUREMENT
, 95 (1) pp. 216-222
[SCI Expanded]
Link
DOI
Kurum Bilgileri
Mühendislik ve Mimarlık Fakültesi
Makine Mühendisliği
Konstrüksiyon ve İmalat
Özgeçmiş Sayfası
2017
Özgün Makale
SCI/SSCI/AHCI
ESCI
Scopus
MEASUREMENT
A review of the current state of abrasive water-jet turning machining method
Link
DOI
KARTAL, F.
(2017) "
A review of the current state of abrasive water-jet turning machining method
",
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
, 88 (1) pp. 495-505
[SCI Expanded]
Link
DOI
" data-bs-content-id="YazarBilgi-20125">
KARTAL, F.
(2017) "
A review of the current state of abrasive water-jet turning machining method
",
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
, 88 (1) pp. 495-505
[SCI Expanded]
Link
DOI
KARTAL, F.
(2017) "
A review of the current state of abrasive water-jet turning machining method
",
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
, 88 (1) pp. 495-505
[SCI Expanded]
Link
DOI
Kurum Bilgileri
Mühendislik ve Mimarlık Fakültesi
Makine Mühendisliği
Konstrüksiyon ve İmalat
Özgeçmiş Sayfası
2017
Diğer (Teknik, not, yorum, vaka takdimi, editöre mektup, özet, kitap krıtiği, araştırma notu, bilirkişi raporu ve benzeri)
SCI/SSCI/AHCI
ESCI
Scopus
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
Turning with abrasive water jet machining – a review
KARTAL, F.
, Gökkaya, H. (2013) "
Turning with abrasive water jet machining – a review
",
Engineering Science and Technology, an International Journal (JESTECH
, 16 (3) pp. 113-122
[ESCI]
" data-bs-content-id="YazarBilgi-20126">
KARTAL, F.
, Gökkaya, H. (2013) "
Turning with abrasive water jet machining – a review
",
Engineering Science and Technology, an International Journal (JESTECH
, 16 (3) pp. 113-122
[ESCI]
KARTAL, F.
, Gökkaya, H. (2013) "
Turning with abrasive water jet machining – a review
",
Engineering Science and Technology, an International Journal (JESTECH
, 16 (3) pp. 113-122
[ESCI]
Kurum Bilgileri
Mühendislik ve Mimarlık Fakültesi
Makine Mühendisliği
Konstrüksiyon ve İmalat
Özgeçmiş Sayfası
2013
Diğer (Teknik, not, yorum, vaka takdimi, editöre mektup, özet, kitap krıtiği, araştırma notu, bilirkişi raporu ve benzeri)
SCI/SSCI/AHCI
ESCI
Scopus
Engineering Science and Technology, an International Journal (JESTECH
The Effect of Process Parameters on Machining Volume and Depth Of Cut In Turning Operation Of AISI 1040 Steel With Abrasive Water Jet
Link
DOI
KARTAL, F.
, Gökkaya, H. (2014) "
The Effect of Process Parameters on Machining Volume and Depth Of Cut In Turning Operation Of AISI 1040 Steel With Abrasive Water Jet
",
PAMUKKALE UNIVERSITY JOURNAL OF ENGINEERING SCIENCES-PAMUKKALE UNIVERSITESI MUHENDISLIK BILIMLERI DERGISI
, 20 (1) pp. 20-24
[TR Dizin]
Link
DOI
" data-bs-content-id="YazarBilgi-20127">
KARTAL, F.
, Gökkaya, H. (2014) "
The Effect of Process Parameters on Machining Volume and Depth Of Cut In Turning Operation Of AISI 1040 Steel With Abrasive Water Jet
",
PAMUKKALE UNIVERSITY JOURNAL OF ENGINEERING SCIENCES-PAMUKKALE UNIVERSITESI MUHENDISLIK BILIMLERI DERGISI
, 20 (1) pp. 20-24
[TR Dizin]
Link
DOI
KARTAL, F.
, Gökkaya, H. (2014) "
The Effect of Process Parameters on Machining Volume and Depth Of Cut In Turning Operation Of AISI 1040 Steel With Abrasive Water Jet
",
PAMUKKALE UNIVERSITY JOURNAL OF ENGINEERING SCIENCES-PAMUKKALE UNIVERSITESI MUHENDISLIK BILIMLERI DERGISI
, 20 (1) pp. 20-24
[TR Dizin]
Link
DOI
Kurum Bilgileri
Mühendislik ve Mimarlık Fakültesi
Makine Mühendisliği
Konstrüksiyon ve İmalat
Özgeçmiş Sayfası
2014
Özgün Makale
SCI/SSCI/AHCI
ESCI
Scopus
PAMUKKALE UNIVERSITY JOURNAL OF ENGINEERING SCIENCES-PAMUKKALE UNIVERSITESI MUHENDISLIK BILIMLERI DERGISI
Investigation of Surface Roughness and MRR for Engineering Polymers with the Abrasive Water Jet Turning Process
Link
DOI
KARTAL, F.
, YERLİKAYA, Z. (2016) "
Investigation of Surface Roughness and MRR for Engineering Polymers with the Abrasive Water Jet Turning Process
",
INTERNATIONAL POLYMER PROCESSING
, 31 (3) pp. 336-345
[SCI Expanded]
Link
DOI
" data-bs-content-id="YazarBilgi-20128">
KARTAL, F.
, YERLİKAYA, Z. (2016) "
Investigation of Surface Roughness and MRR for Engineering Polymers with the Abrasive Water Jet Turning Process
",
INTERNATIONAL POLYMER PROCESSING
, 31 (3) pp. 336-345
[SCI Expanded]
Link
DOI
KARTAL, F.
, YERLİKAYA, Z. (2016) "
Investigation of Surface Roughness and MRR for Engineering Polymers with the Abrasive Water Jet Turning Process
",
INTERNATIONAL POLYMER PROCESSING
, 31 (3) pp. 336-345
[SCI Expanded]
Link
DOI
Kurum Bilgileri
Mühendislik ve Mimarlık Fakültesi
Makine Mühendisliği
Konstrüksiyon ve İmalat
Özgeçmiş Sayfası
2016
Özgün Makale
SCI/SSCI/AHCI
ESCI
Scopus
INTERNATIONAL POLYMER PROCESSING
Optimization of Abrasive Water Jet Turning Parameters for Machining of Low Density Polyethylene Material Based on Experimental Design Method
Link
DOI
KARTAL, F.
, Çetin, M.H., Gökkaya, H., YERLİKAYA, Z. (2014) "
Optimization of Abrasive Water Jet Turning Parameters for Machining of Low Density Polyethylene Material Based on Experimental Design Method
",
INTERNATIONAL POLYMER PROCESSING
, 29 (4) pp. 535-544
[SCI Expanded]
Link
DOI
" data-bs-content-id="YazarBilgi-20129">
KARTAL, F.
, Çetin, M.H., Gökkaya, H., YERLİKAYA, Z. (2014) "
Optimization of Abrasive Water Jet Turning Parameters for Machining of Low Density Polyethylene Material Based on Experimental Design Method
",
INTERNATIONAL POLYMER PROCESSING
, 29 (4) pp. 535-544
[SCI Expanded]
Link
DOI
KARTAL, F.
, Çetin, M.H., Gökkaya, H., YERLİKAYA, Z. (2014) "
Optimization of Abrasive Water Jet Turning Parameters for Machining of Low Density Polyethylene Material Based on Experimental Design Method
",
INTERNATIONAL POLYMER PROCESSING
, 29 (4) pp. 535-544
[SCI Expanded]
Link
DOI
Kurum Bilgileri
Mühendislik ve Mimarlık Fakültesi
Makine Mühendisliği
Konstrüksiyon ve İmalat
Özgeçmiş Sayfası
2014
Özgün Makale
SCI/SSCI/AHCI
ESCI
Scopus
INTERNATIONAL POLYMER PROCESSING
Determination of Fatigue Life and Failure Location of Vehicle Cylindrical LPG Fuel Tanks
Link
DOI
KARTAL, F.
, Kişioğlu, Y. (2016) "
Determination of Fatigue Life and Failure Location of Vehicle Cylindrical LPG Fuel Tanks
",
PRAKTISCHE METALLOGRAPHIE-PRACTICAL METALLOGRAPHY
, 53 (6) pp. 360-378
[SCI Expanded]
Link
DOI
" data-bs-content-id="YazarBilgi-20130">
KARTAL, F.
, Kişioğlu, Y. (2016) "
Determination of Fatigue Life and Failure Location of Vehicle Cylindrical LPG Fuel Tanks
",
PRAKTISCHE METALLOGRAPHIE-PRACTICAL METALLOGRAPHY
, 53 (6) pp. 360-378
[SCI Expanded]
Link
DOI
KARTAL, F.
, Kişioğlu, Y. (2016) "
Determination of Fatigue Life and Failure Location of Vehicle Cylindrical LPG Fuel Tanks
",
PRAKTISCHE METALLOGRAPHIE-PRACTICAL METALLOGRAPHY
, 53 (6) pp. 360-378
[SCI Expanded]
Link
DOI
Kurum Bilgileri
Mühendislik ve Mimarlık Fakültesi
Makine Mühendisliği
Konstrüksiyon ve İmalat
Özgeçmiş Sayfası
2016
Özgün Makale
SCI/SSCI/AHCI
ESCI
Scopus
PRAKTISCHE METALLOGRAPHIE-PRACTICAL METALLOGRAPHY
Fatigue Performance Evaluations of Vehicle Toroidal Liquefied Petroleum Gas Fuel Tanks
Link
DOI
KARTAL, F.
, Kişioğlu, Y. (2017) "
Fatigue Performance Evaluations of Vehicle Toroidal Liquefied Petroleum Gas Fuel Tanks
",
JOURNAL OF PRESSURE VESSEL TECHNOLOGY-TRANSACTIONS OF THE ASME
, 139 (4) p. 41402
[SCI Expanded]
Link
DOI
" data-bs-content-id="YazarBilgi-20131">
KARTAL, F.
, Kişioğlu, Y. (2017) "
Fatigue Performance Evaluations of Vehicle Toroidal Liquefied Petroleum Gas Fuel Tanks
",
JOURNAL OF PRESSURE VESSEL TECHNOLOGY-TRANSACTIONS OF THE ASME
, 139 (4) p. 41402
[SCI Expanded]
Link
DOI
KARTAL, F.
, Kişioğlu, Y. (2017) "
Fatigue Performance Evaluations of Vehicle Toroidal Liquefied Petroleum Gas Fuel Tanks
",
JOURNAL OF PRESSURE VESSEL TECHNOLOGY-TRANSACTIONS OF THE ASME
, 139 (4) p. 41402
[SCI Expanded]
Link
DOI
Kurum Bilgileri
Mühendislik ve Mimarlık Fakültesi
Makine Mühendisliği
Konstrüksiyon ve İmalat
Özgeçmiş Sayfası
2017
Özgün Makale
SCI/SSCI/AHCI
ESCI
Scopus
JOURNAL OF PRESSURE VESSEL TECHNOLOGY-TRANSACTIONS OF THE ASME
Effect of abrasive water jet turning process parameters on surface roughness and material removal rate of AISI 1050 steel
Link
DOI
KARTAL, F.
, Gökkaya, H. (2015) "
Effect of abrasive water jet turning process parameters on surface roughness and material removal rate of AISI 1050 steel
",
MATERIALS TESTING
, 57 (9) pp. 773-782
[SCI Expanded]
Link
DOI
" data-bs-content-id="YazarBilgi-20132">
KARTAL, F.
, Gökkaya, H. (2015) "
Effect of abrasive water jet turning process parameters on surface roughness and material removal rate of AISI 1050 steel
",
MATERIALS TESTING
, 57 (9) pp. 773-782
[SCI Expanded]
Link
DOI
KARTAL, F.
, Gökkaya, H. (2015) "
Effect of abrasive water jet turning process parameters on surface roughness and material removal rate of AISI 1050 steel
",
MATERIALS TESTING
, 57 (9) pp. 773-782
[SCI Expanded]
Link
DOI
Kurum Bilgileri
Mühendislik ve Mimarlık Fakültesi
Makine Mühendisliği
Konstrüksiyon ve İmalat
Özgeçmiş Sayfası
2015
Özgün Makale
SCI/SSCI/AHCI
ESCI
Scopus
MATERIALS TESTING
Part Production Time Estimation Model in 3d Printer: Data- Based Machine Learning Approach And Parameter Analysis
KARTAL, F.
, Kaptan, A. (2023) "
Part Production Time Estimation Model in 3d Printer: Data- Based Machine Learning Approach And Parameter Analysis
",
SIVAS II. INTERNATIONAL CONFERENCE ON SCIENTIFIC AND INNOVATION RESEARCH
, Türkiye, (
Ekim 2023
)
KARTAL, F.
, Kaptan, A. (2023) "
Part Production Time Estimation Model in 3d Printer: Data- Based Machine Learning Approach And Parameter Analysis
",
SIVAS II. INTERNATIONAL CONFERENCE ON SCIENTIFIC AND INNOVATION RESEARCH
, Türkiye, (
Ekim 2023
)
Kurum Bilgileri
Mühendislik ve Mimarlık Fakültesi
Makine Mühendisliği
Konstrüksiyon ve İmalat
Özgeçmiş Sayfası
2023
Tebliğ/Bildiri
SCI/SSCI/AHCI
ESCI
Scopus
SIVAS II. INTERNATIONAL CONFERENCE ON SCIENTIFIC AND INNOVATION RESEARCH
THE EFFECT OF ANNEALING PROCESS APPLIED TO PLA PARTS MANUFACTURED BY FUSED DEPOSITION MODELING ON MECHANICAL PROPERTIES
Kaptan, A.,
KARTAL, F.
(2021) "
THE EFFECT OF ANNEALING PROCESS APPLIED TO PLA PARTS MANUFACTURED BY FUSED DEPOSITION MODELING ON MECHANICAL PROPERTIES
",
II. INTERNATIONAL HALICH CONGRESS ON MULTIDISCIPLINARY SCIENTIFIC RESEARCH
, Türkiye, (
Kasım 2021
)
" data-bs-content-id="YazarBilgi-20135">
Kaptan, A.,
KARTAL, F.
(2021) "
THE EFFECT OF ANNEALING PROCESS APPLIED TO PLA PARTS MANUFACTURED BY FUSED DEPOSITION MODELING ON MECHANICAL PROPERTIES
",
II. INTERNATIONAL HALICH CONGRESS ON MULTIDISCIPLINARY SCIENTIFIC RESEARCH
, Türkiye, (
Kasım 2021
)
Kaptan, A.,
KARTAL, F.
(2021) "
THE EFFECT OF ANNEALING PROCESS APPLIED TO PLA PARTS MANUFACTURED BY FUSED DEPOSITION MODELING ON MECHANICAL PROPERTIES
",
II. INTERNATIONAL HALICH CONGRESS ON MULTIDISCIPLINARY SCIENTIFIC RESEARCH
, Türkiye, (
Kasım 2021
)
Kurum Bilgileri
Mühendislik ve Mimarlık Fakültesi
Makine Mühendisliği
Konstrüksiyon ve İmalat
Özgeçmiş Sayfası
2021
Tebliğ/Bildiri
SCI/SSCI/AHCI
ESCI
Scopus
II. INTERNATIONAL HALICH CONGRESS ON MULTIDISCIPLINARY SCIENTIFIC RESEARCH
«
631
632
633
634
635
636
637
638
639
640
»