| Yazarlar (1) |
Prof. Dr. Serkan ISLAK
Kastamonu Üniversitesi, Türkiye |
| Özet |
| In this study, wear properties of FeW-B4C coatings produced by tungsten inert gas (TIG) process on the AISI 1060 steel were investigated. TIG process was selected because it is a cost-effective approach for melting-based coatings. The treated surfaces were evaluated and characterized by means of scanning electron microscope (SEM), X-ray diffraction analysis, and electron dispersive spectrometry (EDS). The microhardness and wear experiment were also performed by using a microhardness machine and ball-on-disk tribometer. SEM observations showed that the obtained coating had a smooth and uniform surface. According to XRD analysis, borides and carbides phases formed in the coatings. The wear behavior of the coatings was compared with ball-on-disc configuration wear tests, at the same conditions. Average coefficient of friction values of the coatings were obtained at relatively low levels. |
| Anahtar Kelimeler |
| coating | microstructure | TIG process | Wear |
| Makale Türü | Özgün Makale |
| Makale Alt Türü | SSCI, AHCI, SCI, SCI-Exp dergilerinde yayınlanan tam makale |
| Dergi Adı | ARCHIVES OF METALLURGY AND MATERIALS |
| Dergi ISSN | 1733-3490 Wos Dergi Scopus Dergi |
| Dergi Tarandığı Indeksler | SCI-Expanded |
| Dergi Grubu | Q4 |
| Makale Dili | İngilizce |
| Basım Tarihi | 12-2017 |
| Cilt No | 62 |
| Sayı | 4 |
| Sayfalar | 2001 / 2006 |
| Doi Numarası | 10.1515/amm-2017-0298 |
| Atıf Sayıları | |
| WoS | 2 |
| SCOPUS | 2 |
| Google Scholar | 4 |
