Abushraıda, A.M., Islak, S. (2019) "Characterization of Bronze Matrix TiC/Mo2C Reinforced FGMs", The Internatinonal Conference on Materials Science, Mechanical and Automotive Engineerings and Technology in Cappadocia , Nevşehir, Türkiye, (Temmuz 2019)
Garıba, A.M.M., Islak, S. (2019) "Microstructure properties of Ti based FGMs by using PM", The Internatinonal Conference on Materials Science, Mechanical and Automotive Engineerings and Technology in Cappadocia , Nevşehir, Türkiye, (Temmuz 2019)
Saıd, I.S.S., Islak, S. (2019) "Characterizationof Ti3SiC2-CNF materials by powder metallurgy", The Internatinonal Conference on Materials Science, Mechanical and Automotive Engineerings and Technology in Cappadocia , Nevşehir, Türkiye, (Temmuz 2019)
Değirmenci, G., Islak, S. (2019) "THE EFFECT OF HEAT TREATMENT ON THE MICROSTRUCTURE PROPERTIES OF ZIRCONIUM OXIDE COATINGS.", The Internatinonal Conference on Materials Science, Mechanical and Automotive Engineerings and Technology in Cappadoc , Nevşehir, Türkiye, (Temmuz 2019)
Houssain, H., Islak, S. (2022) "EFFECT OF CNT ON SOME PROPERTIES IN CNT REINFORCED COMPOSITE WITH CoCrMo MATRIX", INTERNATIONAL ISTANBUL MODERN SCIENTIFIC RESEARCH CONGRESS–IV , (pp. 417-424), (Aralık 2022)
Islak, S., Kriewah, O.A.E. (2022) "Characterization of Mo5SiB2 Based SiC Reinforced Composites", 6th INTERNATIONAL NEW YORK CONFERENCE ON EVOLVING TRENDS IN INTERDISCIPLINARY RESEARCH & PRACTICES , New York, Amerika Birleşik Devletleri, (Nisan 2022) " data-bs-content-id="YazarBilgi-28093">
Islak, S., Kriewah, O.A.E. (2022) "Characterization of Mo5SiB2 Based SiC Reinforced Composites", 6th INTERNATIONAL NEW YORK CONFERENCE ON EVOLVING TRENDS IN INTERDISCIPLINARY RESEARCH & PRACTICES , New York, Amerika Birleşik Devletleri, (Nisan 2022) Islak, S., Kriewah, O.A.E. (2022) "Characterization of Mo5SiB2 Based SiC Reinforced Composites", 6th INTERNATIONAL NEW YORK CONFERENCE ON EVOLVING TRENDS IN INTERDISCIPLINARY RESEARCH & PRACTICES , New York, Amerika Birleşik Devletleri, (Nisan 2022)
Kriewah, O.A.E., Islak, S. (2022) "Production and Characterization of Cu-Cr-B4C-CNF Hybrid Composites by Powder Metallurgy Method", 6th INTERNATIONAL NEW YORK CONFERENCE ON EVOLVING TRENDS IN INTERDISCIPLINARY RESEARCH & PRACTICES , New York, Amerika Birleşik Devletleri, (Nisan 2022)
Islak, S., Houssain, H., Danacı, H.C. (2022) "CHARACTERIZATION OF MICROSTRUCTURE AND HARDNESS PROPERTIES OF Ti-Cu/B4C COMPOSITES", 7. INTERNATIONAL CONFERENCE ON EVOLVING TRENDS IN INTERDISCIPLINARY RESEARCH & PRACTICES , (pp. 571-576), New York, Amerika Birleşik Devletleri, (Ekim 2022) " data-bs-content-id="YazarBilgi-28095">
Islak, S., Houssain, H., Danacı, H.C. (2022) "CHARACTERIZATION OF MICROSTRUCTURE AND HARDNESS PROPERTIES OF Ti-Cu/B4C COMPOSITES", 7. INTERNATIONAL CONFERENCE ON EVOLVING TRENDS IN INTERDISCIPLINARY RESEARCH & PRACTICES , (pp. 571-576), New York, Amerika Birleşik Devletleri, (Ekim 2022) Islak, S., Houssain, H., Danacı, H.C. (2022) "CHARACTERIZATION OF MICROSTRUCTURE AND HARDNESS PROPERTIES OF Ti-Cu/B4C COMPOSITES", 7. INTERNATIONAL CONFERENCE ON EVOLVING TRENDS IN INTERDISCIPLINARY RESEARCH & PRACTICES , (pp. 571-576), New York, Amerika Birleşik Devletleri, (Ekim 2022)
Islak, S., Houssain, H. (2022) "NEW APPROACHES TO THE MATRIX OF DIAMOND CUTTING TOOLS USED IN NATURAL STONE CUTTING WORKS", 7. INTERNATIONAL CONFERENCE ON EVOLVING TRENDS IN INTERDISCIPLINARY RESEARCH & PRACTICES , (pp. 577-584), New York, Amerika Birleşik Devletleri, (Ekim 2022)
OKAY, F., Islak, S. (2021) "TM ile üretilen Al-Ti3AlC2 kompozitlerin mikroyapı özellikleri", 3. Uluslararası Savunma Sanayi Sempozyumu , Türkiye, (Ekim 2021)
Islak, S., AKKAŞ, M. (2018) "Karbon nanofiber katkılı elmaslı kesici soketlerin üretimi", International Eurasian Conference on Science, Engineering and Technology (EurasianSciEnTech 2018) , (pp. 1352-1357), Ankara, Türkiye, (Aralık 2018)
Islak, S., AKKAŞ, M. (2018) "AISI 316L paslanmaz çelik üzerinde üretilen hibrit kompozit kaplamaların özellikleri", International Eurasian Conference on Science, Engineering and Technology (EurasianSciEnTech 2018) , (Aralık 2018)
AKKAŞ, M., Islak, S. (2018) "Toz metalürjisi yöntemi ile nanopartikül katkılı Ni-B alaşımlarının üretimi ve karakterizasyonu", International Eurasian Conference on Science, Engineering and Technology (EurasianSciEnTech 2018) , (Aralık 2018)
Çalıgülü, U., Islak, S., Çanakçı, A., Gençsoy, U., Kalli, R. (2017) "Evaluation of Microstructure and Mechanical Properties in the GGG40 Austempered Ductile Cast Iron", 8th International Advanced Technologies Symposium (IATS’17), October 19-22, 2017, Elazig, TURKEY , (pp. 6-14), Elazığ, Türkiye, (Aralık 2017) " data-bs-content-id="YazarBilgi-28102">
Çalıgülü, U., Islak, S., Çanakçı, A., Gençsoy, U., Kalli, R. (2017) "Evaluation of Microstructure and Mechanical Properties in the GGG40 Austempered Ductile Cast Iron", 8th International Advanced Technologies Symposium (IATS’17), October 19-22, 2017, Elazig, TURKEY , (pp. 6-14), Elazığ, Türkiye, (Aralık 2017) Çalıgülü, U., Islak, S., Çanakçı, A., Gençsoy, U., Kalli, R. (2017) "Evaluation of Microstructure and Mechanical Properties in the GGG40 Austempered Ductile Cast Iron", 8th International Advanced Technologies Symposium (IATS’17), October 19-22, 2017, Elazig, TURKEY , (pp. 6-14), Elazığ, Türkiye, (Aralık 2017)
Karagöz, M., Islak, S., Buytoz, S., Kurt, B. (2011) "Microstructural Characteristics of High Velocity Oxygen Fuel (HVOF) sprayed NiCrBSi-SiC Composite Coating on a Low Alloy Steel", 6th International Advanced Technologies Symposium (IATS’11) , (Mayıs 2011)
Türkmen, M., Çalıgülü, U., Islak, S., Tufanoğlu, E., Gökdaş, M. (2018) "Weldability of OPTIM 700 MC-St37 Steel Pair By Plasma Transfer Arc (PTA) Welding Method", 3rd International Conference on Engineering Technology and Applied Sciences (ICETAS’18) , (pp. 31-37), Üsküp, Makedonya, (Ağustos 2018) " data-bs-content-id="YazarBilgi-28106">
Türkmen, M., Çalıgülü, U., Islak, S., Tufanoğlu, E., Gökdaş, M. (2018) "Weldability of OPTIM 700 MC-St37 Steel Pair By Plasma Transfer Arc (PTA) Welding Method", 3rd International Conference on Engineering Technology and Applied Sciences (ICETAS’18) , (pp. 31-37), Üsküp, Makedonya, (Ağustos 2018) Türkmen, M., Çalıgülü, U., Islak, S., Tufanoğlu, E., Gökdaş, M. (2018) "Weldability of OPTIM 700 MC-St37 Steel Pair By Plasma Transfer Arc (PTA) Welding Method", 3rd International Conference on Engineering Technology and Applied Sciences (ICETAS’18) , (pp. 31-37), Üsküp, Makedonya, (Ağustos 2018)
Islak, S., AKKAŞ, M., Abushraida, A.M. (2018) "Bronz matrisli fonksiyonel derecelendirilmiş kompozitlerin mikroyapı ve sertlik özellikleri", International Eurasian Conference on Science, Engineering and Technology (EurasianSciEnTech 2018) , (Aralık 2018)
Islak, S., Çalıgülü, U., Hraam, H.R., ÖZORAK, C., Koç, V. (2018) "Electrical Conductivity and Microstructure Properties of Cu-Mo Coatings", 1st International Symposium on Light Alloys and Composite Materials , (pp. 16-18), (Nisan 2018)
Eski, Ö., Islak, S. (2018) "THE EFFECT OF SILVER ON ELECTRICAL CONDUCTIVITY OFCu-B4C-Ag COMPOSITES", IV. International Composite Material Symposium , (pp. 749-755), (Kasım 2018)
Islak, S., Awath, K., Çelik, E., Çalıgülü, U., ÖZORAK, C. (2017) "AlCu-B4C/hBN Hibrit Kompozitlerin Sertlik ve Mikroyapı Özellikleri", 8th International Advanced Technologies Symposium (IATS’17), October 19-22, 2017, Elazig, TURKEY, , (pp. 609-614), Elazığ, Türkiye, (Aralık 2017)
