Kriewah, O.A.E., Islak, S. (2022) "Synthesis of Cu-Cr-B4C-CNF hybrid composites", Kastamonu University Journal of Engineering and Sciences (KUJES), 8 (2) pp. 90-97 DOI " data-bs-content-id="YazarBilgi-28020">
Kriewah, O.A.E., Islak, S. (2022) "Synthesis of Cu-Cr-B4C-CNF hybrid composites", Kastamonu University Journal of Engineering and Sciences (KUJES), 8 (2) pp. 90-97 DOI Kriewah, O.A.E., Islak, S. (2022) "Synthesis of Cu-Cr-B4C-CNF hybrid composites", Kastamonu University Journal of Engineering and Sciences (KUJES), 8 (2) pp. 90-97 DOI
Kriewah, O.A.E., Islak, S. (2022) "CORROSION PROPERTIES OF Cu-Cr-B4C-CNF HYBRID COMPOSITES PRODUCED BY PM", Technological Applied Sciences, 17 (2) pp. 39-45 Link DOI " data-bs-content-id="YazarBilgi-28021">
Kriewah, O.A.E., Islak, S. (2022) "CORROSION PROPERTIES OF Cu-Cr-B4C-CNF HYBRID COMPOSITES PRODUCED BY PM", Technological Applied Sciences, 17 (2) pp. 39-45 Link DOI Kriewah, O.A.E., Islak, S. (2022) "CORROSION PROPERTIES OF Cu-Cr-B4C-CNF HYBRID COMPOSITES PRODUCED BY PM", Technological Applied Sciences, 17 (2) pp. 39-45 Link DOI
Islak, S., Koç, V., Gariba, A.M.M. (2022) "Wear and Microstructural Properties of Ni-B4C/CNF Composites", SCIENCE OF SINTERING, 54 (4) pp. 439-448 [SCI Expanded] Link DOI " data-bs-content-id="YazarBilgi-28023">
Islak, S., Koç, V., Gariba, A.M.M. (2022) "Wear and Microstructural Properties of Ni-B4C/CNF Composites", SCIENCE OF SINTERING, 54 (4) pp. 439-448 [SCI Expanded] Link DOI Islak, S., Koç, V., Gariba, A.M.M. (2022) "Wear and Microstructural Properties of Ni-B4C/CNF Composites", SCIENCE OF SINTERING, 54 (4) pp. 439-448 [SCI Expanded] Link DOI
Islak, S., Kır, D., Çelik, E., Çelik, H. (2012) "Effect of boron carbide on the microstructure and the mechanical properties of segments produced using hot pressing method", Scientific Research and Essays, 0 (7) pp. 2095-2103 Link " data-bs-content-id="YazarBilgi-28031">
Islak, S., Kır, D., Çelik, E., Çelik, H. (2012) "Effect of boron carbide on the microstructure and the mechanical properties of segments produced using hot pressing method", Scientific Research and Essays, 0 (7) pp. 2095-2103 Link Islak, S., Kır, D., Çelik, E., Çelik, H. (2012) "Effect of boron carbide on the microstructure and the mechanical properties of segments produced using hot pressing method", Scientific Research and Essays, 0 (7) pp. 2095-2103 Link
Hraam, H.R., Değirmenci, G., Islak, S. (2019) "THE EFFECT OF HEAT TREATMENT ON THE MICROSTRUCTURE AND MECHANICAL PROPERTIES OF ZrO2-8 Y2O3 COATINGS", Technological Applied Sciences, 14 (3) pp. 105-114 DOI " data-bs-content-id="YazarBilgi-28032">
Hraam, H.R., Değirmenci, G., Islak, S. (2019) "THE EFFECT OF HEAT TREATMENT ON THE MICROSTRUCTURE AND MECHANICAL PROPERTIES OF ZrO2-8 Y2O3 COATINGS", Technological Applied Sciences, 14 (3) pp. 105-114 DOI Hraam, H.R., Değirmenci, G., Islak, S. (2019) "THE EFFECT OF HEAT TREATMENT ON THE MICROSTRUCTURE AND MECHANICAL PROPERTIES OF ZrO2-8 Y2O3 COATINGS", Technological Applied Sciences, 14 (3) pp. 105-114 DOI
Islak, S., Ulutan, M., Buytoz, S. (2020) "Microstructure and Wear Properties of Hot-Pressed NiCrBSi/TiC Composite Materials", RUSSIAN JOURNAL OF NON-FERROUS METALS, 61 (5) pp. 571-582 [SCI Expanded] Link DOI " data-bs-content-id="YazarBilgi-28033">
Islak, S., Ulutan, M., Buytoz, S. (2020) "Microstructure and Wear Properties of Hot-Pressed NiCrBSi/TiC Composite Materials", RUSSIAN JOURNAL OF NON-FERROUS METALS, 61 (5) pp. 571-582 [SCI Expanded] Link DOI Islak, S., Ulutan, M., Buytoz, S. (2020) "Microstructure and Wear Properties of Hot-Pressed NiCrBSi/TiC Composite Materials", RUSSIAN JOURNAL OF NON-FERROUS METALS, 61 (5) pp. 571-582 [SCI Expanded] Link DOI
Gariba, A.M.M., Islak, S. (2020) "Corrosion Properties of Ti-B4C/CNF Functionally Graded Materials", Technological Applied Sciences (NWSATAS), 15 (3) pp. 41-49 " data-bs-content-id="YazarBilgi-28035">
Gariba, A.M.M., Islak, S. (2020) "Corrosion Properties of Ti-B4C/CNF Functionally Graded Materials", Technological Applied Sciences (NWSATAS), 15 (3) pp. 41-49 Gariba, A.M.M., Islak, S. (2020) "Corrosion Properties of Ti-B4C/CNF Functionally Graded Materials", Technological Applied Sciences (NWSATAS), 15 (3) pp. 41-49
Islak, S., Abushraıda, A.M. (2019) "Characterization of Functionally Graded Bronze Matrix Ceramic Reinforced Composite Materials.", Sakarya University Journal of Science, 23 (6) pp. 1137-1143 [TR Dizin] Link DOI " data-bs-content-id="YazarBilgi-28039">
Islak, S., Abushraıda, A.M. (2019) "Characterization of Functionally Graded Bronze Matrix Ceramic Reinforced Composite Materials.", Sakarya University Journal of Science, 23 (6) pp. 1137-1143 [TR Dizin] Link DOI Islak, S., Abushraıda, A.M. (2019) "Characterization of Functionally Graded Bronze Matrix Ceramic Reinforced Composite Materials.", Sakarya University Journal of Science, 23 (6) pp. 1137-1143 [TR Dizin] Link DOI
Islak, S. (2017) "WEAR CHARACTERISTICS OF FeW/FeW-B4C COATINGS PRODUCED BY TIG PROCESS", ARCHIVES OF METALLURGY AND MATERIALS, 62 (4) pp. 2001-2006 [SCI Expanded] DOI " data-bs-content-id="YazarBilgi-28042">
Islak, S. (2017) "WEAR CHARACTERISTICS OF FeW/FeW-B4C COATINGS PRODUCED BY TIG PROCESS", ARCHIVES OF METALLURGY AND MATERIALS, 62 (4) pp. 2001-2006 [SCI Expanded] DOI Islak, S. (2017) "WEAR CHARACTERISTICS OF FeW/FeW-B4C COATINGS PRODUCED BY TIG PROCESS", ARCHIVES OF METALLURGY AND MATERIALS, 62 (4) pp. 2001-2006 [SCI Expanded] DOI
Güler, S.H., Güler, Ö., Evin, E., Islak, S. (2016) "Electrical and optical properties of ZnO milled Fe2O3 nanocomposites produced by powder metallurgy route", OPTIK, 127 (6) pp. 3187-3191 [SCI Expanded] DOI " data-bs-content-id="YazarBilgi-28047">
Güler, S.H., Güler, Ö., Evin, E., Islak, S. (2016) "Electrical and optical properties of ZnO milled Fe2O3 nanocomposites produced by powder metallurgy route", OPTIK, 127 (6) pp. 3187-3191 [SCI Expanded] DOI Güler, S.H., Güler, Ö., Evin, E., Islak, S. (2016) "Electrical and optical properties of ZnO milled Fe2O3 nanocomposites produced by powder metallurgy route", OPTIK, 127 (6) pp. 3187-3191 [SCI Expanded] DOI
Mustafa, Y.M., Islak, S. (2009) "GTA YÖNTEMİ KULLANILARAK ÜRETİLEN SiC p ESASLI KAPLAMALARIN AŞINMA DAVRANIŞLARININ İNCELENMESİ", e-Journal of New World Sciences Academy, 4 (2) pp. 227-237 Link " data-bs-content-id="YazarBilgi-28048">
Mustafa, Y.M., Islak, S. (2009) "GTA YÖNTEMİ KULLANILARAK ÜRETİLEN SiC p ESASLI KAPLAMALARIN AŞINMA DAVRANIŞLARININ İNCELENMESİ", e-Journal of New World Sciences Academy, 4 (2) pp. 227-237 Link Mustafa, Y.M., Islak, S. (2009) "GTA YÖNTEMİ KULLANILARAK ÜRETİLEN SiC p ESASLI KAPLAMALARIN AŞINMA DAVRANIŞLARININ İNCELENMESİ", e-Journal of New World Sciences Academy, 4 (2) pp. 227-237 Link
Islak, S. (2013) "Effect of alumina addition on the microstructure properties of plasma sprayed zirconia alumina coatings", OPTOELECTRONICS AND ADVANCED MATERIALS-RAPID COMMUNICATIONS, 7 (7) pp. 585-589 [Scopus] " data-bs-content-id="YazarBilgi-28049">
Islak, S. (2013) "Effect of alumina addition on the microstructure properties of plasma sprayed zirconia alumina coatings", OPTOELECTRONICS AND ADVANCED MATERIALS-RAPID COMMUNICATIONS, 7 (7) pp. 585-589 [Scopus] Islak, S. (2013) "Effect of alumina addition on the microstructure properties of plasma sprayed zirconia alumina coatings", OPTOELECTRONICS AND ADVANCED MATERIALS-RAPID COMMUNICATIONS, 7 (7) pp. 585-589 [Scopus]
Islak, S., Çelik, H. (2015) "Effect of sintering temperature and boron carbide content on the wear behavior of hot pressed diamond cutting segments", SCIENCE OF SINTERING, 47 (2) pp. 131-143 [SCI Expanded] Link DOI " data-bs-content-id="YazarBilgi-28050">
Islak, S., Çelik, H. (2015) "Effect of sintering temperature and boron carbide content on the wear behavior of hot pressed diamond cutting segments", SCIENCE OF SINTERING, 47 (2) pp. 131-143 [SCI Expanded] Link DOI Islak, S., Çelik, H. (2015) "Effect of sintering temperature and boron carbide content on the wear behavior of hot pressed diamond cutting segments", SCIENCE OF SINTERING, 47 (2) pp. 131-143 [SCI Expanded] Link DOI
Islak, S., Buytoz, S., Karagöz, M. (2012) "Microstructural development on AISI 1060 steel by FeW B4C composite coating produced by using tungsten inert gas TIG process", INDIAN JOURNAL OF ENGINEERING AND MATERIALS SCIENCES, 19 (4) pp. 253-259 [Scopus] Link " data-bs-content-id="YazarBilgi-28051">
Islak, S., Buytoz, S., Karagöz, M. (2012) "Microstructural development on AISI 1060 steel by FeW B4C composite coating produced by using tungsten inert gas TIG process", INDIAN JOURNAL OF ENGINEERING AND MATERIALS SCIENCES, 19 (4) pp. 253-259 [Scopus] Link Islak, S., Buytoz, S., Karagöz, M. (2012) "Microstructural development on AISI 1060 steel by FeW B4C composite coating produced by using tungsten inert gas TIG process", INDIAN JOURNAL OF ENGINEERING AND MATERIALS SCIENCES, 19 (4) pp. 253-259 [Scopus] Link
Buytoz, S., Ulutan, M., Kurt, B., Islak, S., Somunkıran, İ. (2010) "Microstructural characteristic of WC Ni B4C reinforced composite coatings on AISI 304 stainless steel by plasma transferred arc weld surfacing", e-Journal of New World Sciences Academy, 5 (1) pp. 35-47 Link " data-bs-content-id="YazarBilgi-28053">
Buytoz, S., Ulutan, M., Kurt, B., Islak, S., Somunkıran, İ. (2010) "Microstructural characteristic of WC Ni B4C reinforced composite coatings on AISI 304 stainless steel by plasma transferred arc weld surfacing", e-Journal of New World Sciences Academy, 5 (1) pp. 35-47 Link Buytoz, S., Ulutan, M., Kurt, B., Islak, S., Somunkıran, İ. (2010) "Microstructural characteristic of WC Ni B4C reinforced composite coatings on AISI 304 stainless steel by plasma transferred arc weld surfacing", e-Journal of New World Sciences Academy, 5 (1) pp. 35-47 Link
Islak, S., Özorak, C., Küçük, Ö., Akkaş, M., Sezgin, C.T. (2015) "Microstructure and Hardness Properties of high velocity oxygen fuel HVOF Sprayed WCCo SiC Coatings", Kastamonu Üniversitesi Mühendislik ve Fen Bilimleri Dergisi, 1 (1) pp. 1-7 " data-bs-content-id="YazarBilgi-28055">
Islak, S., Özorak, C., Küçük, Ö., Akkaş, M., Sezgin, C.T. (2015) "Microstructure and Hardness Properties of high velocity oxygen fuel HVOF Sprayed WCCo SiC Coatings", Kastamonu Üniversitesi Mühendislik ve Fen Bilimleri Dergisi, 1 (1) pp. 1-7 Islak, S., Özorak, C., Küçük, Ö., Akkaş, M., Sezgin, C.T. (2015) "Microstructure and Hardness Properties of high velocity oxygen fuel HVOF Sprayed WCCo SiC Coatings", Kastamonu Üniversitesi Mühendislik ve Fen Bilimleri Dergisi, 1 (1) pp. 1-7
Akkaş, M., Ozan, S., Islak, S., Çalıgülü, U. (2015) "Investigation of Coatability of NiAl Powder to AISI 304 Stainless Steel Using SHS Process", Kastamonu Üniversitesi Mühendislik ve Fen Bilimleri Dergisi, 1 (1) pp. 17-21 " data-bs-content-id="YazarBilgi-28056">
Akkaş, M., Ozan, S., Islak, S., Çalıgülü, U. (2015) "Investigation of Coatability of NiAl Powder to AISI 304 Stainless Steel Using SHS Process", Kastamonu Üniversitesi Mühendislik ve Fen Bilimleri Dergisi, 1 (1) pp. 17-21 Akkaş, M., Ozan, S., Islak, S., Çalıgülü, U. (2015) "Investigation of Coatability of NiAl Powder to AISI 304 Stainless Steel Using SHS Process", Kastamonu Üniversitesi Mühendislik ve Fen Bilimleri Dergisi, 1 (1) pp. 17-21
Kir, D., Islak, S., Celik, H., Celik, E. (2012) "Effect of the cBN Content and Sintering Temperature on the Transverse Rupture Strength and Hardness of cBN Diamond Cutting Tools", SCIENCE OF SINTERING, 44 (2) pp. 235-243 [Scopus] Link DOI " data-bs-content-id="YazarBilgi-28057">
Kir, D., Islak, S., Celik, H., Celik, E. (2012) "Effect of the cBN Content and Sintering Temperature on the Transverse Rupture Strength and Hardness of cBN Diamond Cutting Tools", SCIENCE OF SINTERING, 44 (2) pp. 235-243 [Scopus] Link DOI Kir, D., Islak, S., Celik, H., Celik, E. (2012) "Effect of the cBN Content and Sintering Temperature on the Transverse Rupture Strength and Hardness of cBN Diamond Cutting Tools", SCIENCE OF SINTERING, 44 (2) pp. 235-243 [Scopus] Link DOI
Islak, S., Buytoz, S., Ersoz, E., Orhan, N., Stokes, J., Hashmi, M.S., Somunkiran, I., Tosun, N. (2012) "Effect on microstructure of TiO2 rate in Al2O3 TiO2 composite coating produced using plasma spray method", OPTOELECTRONICS AND ADVANCED MATERIALS-RAPID COMMUNICATIONS, 6 (9) pp. 844-849 [Scopus] " data-bs-content-id="YazarBilgi-28058">
Islak, S., Buytoz, S., Ersoz, E., Orhan, N., Stokes, J., Hashmi, M.S., Somunkiran, I., Tosun, N. (2012) "Effect on microstructure of TiO2 rate in Al2O3 TiO2 composite coating produced using plasma spray method", OPTOELECTRONICS AND ADVANCED MATERIALS-RAPID COMMUNICATIONS, 6 (9) pp. 844-849 [Scopus] Islak, S., Buytoz, S., Ersoz, E., Orhan, N., Stokes, J., Hashmi, M.S., Somunkiran, I., Tosun, N. (2012) "Effect on microstructure of TiO2 rate in Al2O3 TiO2 composite coating produced using plasma spray method", OPTOELECTRONICS AND ADVANCED MATERIALS-RAPID COMMUNICATIONS, 6 (9) pp. 844-849 [Scopus]
Buytoz, S., Ulutan, M., Islak, S., Kurt, B., Çelik, O.N. (2013) "Microstructural and wear characteristics of High Velocity Oxygen Fuel HVOF sprayed NiCrBSi SiC composite coating on SAE 1030 steel", ARABIAN JOURNAL FOR SCIENCE AND ENGINEERING, 38 (6) pp. 1481-1491 [SCI] DOI " data-bs-content-id="YazarBilgi-28059">
Buytoz, S., Ulutan, M., Islak, S., Kurt, B., Çelik, O.N. (2013) "Microstructural and wear characteristics of High Velocity Oxygen Fuel HVOF sprayed NiCrBSi SiC composite coating on SAE 1030 steel", ARABIAN JOURNAL FOR SCIENCE AND ENGINEERING, 38 (6) pp. 1481-1491 [SCI] DOI Buytoz, S., Ulutan, M., Islak, S., Kurt, B., Çelik, O.N. (2013) "Microstructural and wear characteristics of High Velocity Oxygen Fuel HVOF sprayed NiCrBSi SiC composite coating on SAE 1030 steel", ARABIAN JOURNAL FOR SCIENCE AND ENGINEERING, 38 (6) pp. 1481-1491 [SCI] DOI
